Search found 36 matches
- 26 Apr 2014, 09:09
- Forum: How do I do this combo/sequence?
- Topic: Assign 2 buttons on controller to 1 key
- Replies: 7
- Views: 7451
Re: Assign 2 buttons on controller to 1 key
You can switch with L3 to a second set and bind the R3 Key with the "`" in the second set. I'm after the same thing, in my emulators I want to change save state slot by pressing ZL+Up = F7 and saving by pressing ZL+Select. I tried your suggestion but that doesn't work, it's only using the second se...
- 26 Apr 2014, 09:03
- Forum: Sets
- Topic: trigger distance zones for set selector
- Replies: 3
- Views: 5685
Re: trigger distance zones for set selector
At the Moment it exist no way to do that.
You can't switch sets on different distances, sorry.
It exist an older discussion thread about that, somewhere in this forum.
You can't switch sets on different distances, sorry.
It exist an older discussion thread about that, somewhere in this forum.
- 26 Apr 2014, 08:56
- Forum: How do I do this combo/sequence?
- Topic: press for 1 button hold for another
- Replies: 1
- Views: 3164
Re: press for 1 button hold for another
http://xpadder.com/forum4/viewtopic.php?f=170&t=3137
look in this thread under "Tap&Hold", this should be the solution
look in this thread under "Tap&Hold", this should be the solution
- 26 Apr 2014, 08:55
- Forum: Other questions
- Topic: The Elder Scrolls Online Any profile for xpadder yet?
- Replies: 4
- Views: 4815
Re: The Elder Scrolls Online Any profile for xpadder yet?
If you found it, everything is fine.
- 26 Apr 2014, 08:52
- Forum: Deutsch
- Topic: Funktionswechsel bzw. Doppelbelegung per Tastendruck
- Replies: 2
- Views: 4051
Re: Funktionswechsel bzw. Doppelbelegung per Tastendruck
Du musst für die Zweitbelegung ein neues Set erstellen und bei gedrückt halten von RB dann eben auf das Set 2 umschalten. Im Set 2 belegst du nun Doppelbelegung, E+(x) ... Schau mal hier http://xpadder.com/forum4/viewtopic.php?f=7&t=3713 dort ist die Verwendung von Sets erklärt, du musst den Wechsel...
- 23 Apr 2014, 07:52
- Forum: Other questions
- Topic: The Elder Scrolls Online Any profile for xpadder yet?
- Replies: 4
- Views: 4815
Re: The Elder Scrolls Online Any profile for xpadder yet?
Maybe you should look in to the "Game Profiles" - Forum!
http://xpadder.com/forum4/viewforum.php?f=9
If you can't see that forum, you are not signed in as buyer, or doesn't bought xpadder.
http://xpadder.com/forum4/viewforum.php?f=9
If you can't see that forum, you are not signed in as buyer, or doesn't bought xpadder.
- 11 Mar 2014, 17:38
- Forum: Deutsch
- Topic: Taste drücken: Funktion 1, Taste halten: Funktion 2 = wie?
- Replies: 5
- Views: 6034
Re: Taste drücken: Funktion 1, Taste halten: Funktion 2 = wie?
Das ist die Zeit (von-bis) in der diese Releasezone ausgelöst wird, ist der Tap kürzer oder länger, dann wird es nicht mehr ausgelöst.
- 08 Mar 2014, 14:45
- Forum: Deutsch
- Topic: Taste drücken: Funktion 1, Taste halten: Funktion 2 = wie?
- Replies: 5
- Views: 6034
Re: Taste drücken: Funktion 1, Taste halten: Funktion 2 = wie?
Die gelben Symbole sind Releasezonen (Loslasszonen), diese werden beim loslassen der Taste ausgelöst. In deinem Beispiel bedeutet es, wenn du nur einen Klick auf deine Taste machst und dieser Klick nicht länger als 0,2 sek dauert, wird beim loslassen CRTL+ALT+K ausgeführt. Die grünen Symbole sind Ha...
- 05 Mar 2014, 20:44
- Forum: Deutsch
- Topic: Taste drücken: Funktion 1, Taste halten: Funktion 2 = wie?
- Replies: 5
- Views: 6034
Re: Taste drücken: Funktion 1, Taste halten: Funktion 2 = wie?
In deinem gelinkten Tutorial ist genau deine Lösung zu finden. Unter "Specials --> Hold&Tap" ist abgebildet wie du es machen musst. Zwischen den beiden gelben Symbolen ist die Tastenkombination (ALT+1) für den kurzen Druck, hier von 0,01 bis 0,30 Sekunden. Nach dem grünen Symbol folgt die Kombinatio...
- 11 Jan 2014, 18:32
- Forum: Game Profiles
- Topic: Arma 2 - DayZ (X360)
- Replies: 6
- Views: 8179
Re: Arma 2 - DayZ (X360)
conflicts should be deleted in the game controlsettings
PS: i use a modified version, without an extra set for the freelook
PS: i use a modified version, without an extra set for the freelook
- 26 Oct 2013, 09:07
- Forum: Game Profiles
- Topic: Star Wars: The Old Republic (X360)
- Replies: 1
- Views: 5724
Star Wars: The Old Republic (X360)
Hi, i have two different ways to control my character in SW:TOR. In both sets, you have up to 40 skills (5 bars x 8 buttons) you can use in game. The sets are best to use for Tanks or Damage Dealers, for healers it lags of group targeting. (coming soon, i hope :) ) differences: (it's only a cosmetic...
- 16 Sep 2013, 15:19
- Forum: How do I do this combo/sequence?
- Topic: Question about Distance Zone and creating a profile for Plex (XBMC)
- Replies: 1
- Views: 3139
Re: Question about Distance Zone and creating a profile for Plex (XBMC)
I don't believe xpadder can differentiate between press and release in the Distancezone, it only register that a distance has arrived/exceeded but not in which direction. Press once F on different distances should be possible, but press R on release on different distances is not possible. (i believe...
- 18 Aug 2013, 18:16
- Forum: Deutsch
- Topic: Mehr Möglichkeiten bei den Analog Einstellungen ???
- Replies: 1
- Views: 3136
Re: Mehr Möglichkeiten bei den Analog Einstellungen ???
Man kann schon jetzt für bestimmte Wege der Analogsticks Funktionen belegen und das in ein Prozentschritten bis 100.
Schau mal hier nach:
http://xpadder.com/forum4/viewtopic.php?f=7&t=3714
unter "Distance Zone"
Einen Toggle kann man zum Beispiel über einen Set-wechsel realisieren.
Schau mal hier nach:
http://xpadder.com/forum4/viewtopic.php?f=7&t=3714
unter "Distance Zone"
Einen Toggle kann man zum Beispiel über einen Set-wechsel realisieren.
- 15 Aug 2013, 08:21
- Forum: Game Profiles
- Topic: Dayz / ARMA II (X360) [BEST OUT]
- Replies: 3
- Views: 5659
Re: Dayz / ARMA II PROFILE [BEST OUT]
Hmm, looks realy familiar to mine
- 10 Jul 2013, 19:02
- Forum: Game Profiles
- Topic: Arma 2 - DayZ (X360)
- Replies: 6
- Views: 8179
Re: Arma 2 - DayZ (X360)
You have to change your keybindings, how described in the first post.
- 19 Apr 2013, 18:05
- Forum: Sets
- Topic: set selector from mouse
- Replies: 2
- Views: 4223
Re: set selector from mouse
I don't believe xpadder is able to receive inputs from other devices.
- 18 Apr 2013, 09:06
- Forum: Sets
- Topic: Feedback for set selectors
- Replies: 14
- Views: 14458
Re: Feedback for set selectors
Is it not a detour to work with Autohotkey or AutoIt and Xpadder?
Autohotkey as example recognizes controller entries by it self.
The disadvantage of this two programs is the lag of a good UserInterface to bind keys, it is all script/code based.
Autohotkey as example recognizes controller entries by it self.
The disadvantage of this two programs is the lag of a good UserInterface to bind keys, it is all script/code based.
- 16 Apr 2013, 21:43
- Forum: How do I do this combo/sequence?
- Topic: tap for X seconds A then pause for Y seconds, repeat
- Replies: 6
- Views: 6479
Re: tap for X seconds A then pause for Y seconds, repeat
You could use the turbo function, with that the assignment will be repeated, as long you press the button.
+ activate the turbo and set it delay to 0.10 sec
Code: Select all
Set1TriggerLeftSlots=TAP TIME 0.18s,NumPad Enter
- 16 Apr 2013, 19:20
- Forum: How do I do this combo/sequence?
- Topic: tap for X seconds A then pause for Y seconds, repeat
- Replies: 6
- Views: 6479
Re: tap for X seconds A then pause for Y seconds, repeat
Could you add your assignment from the profile file?
- 16 Apr 2013, 19:18
- Forum: Other questions
- Topic: Is it possible to create a "mod" for Xpadder?
- Replies: 10
- Views: 9406
Re: Is it possible to create a "mod" for Xpadder?
It exist a lot of good ideas, but who knows how difficult it is to add it to xpadder, without interupt other functions, or have to rewrite the whole programm.
- 16 Apr 2013, 18:31
- Forum: Game Profiles
- Topic: Arma 2 - DayZ (X360)
- Replies: 6
- Views: 8179
Re: [New] Arma 2 - DayZ (X360)
Update v1.1:
- added score on hold on the back button
- CoD like Optics, ironsights on hold left trigger, zoom at trigger distance about 99% + while held glitch workaround
- in freelook mode no ironsights on left trigger, only zoom
- added score on hold on the back button
- CoD like Optics, ironsights on hold left trigger, zoom at trigger distance about 99% + while held glitch workaround
- in freelook mode no ironsights on left trigger, only zoom
- 16 Apr 2013, 05:38
- Forum: Other questions
- Topic: Is it possible to create a "mod" for Xpadder?
- Replies: 10
- Views: 9406
Re: Is it possible to create a "mod" for Xpadder?
I don't know, what's Jonathans plan for xpadder, but maybe he should rethink the extended functions, revise it in a Version 2.0, and include a check, to find out for which version of xpadder is a profil made, to be compatible for older profils. Also i wish a feature, wherein you can set the validity...
- 15 Apr 2013, 16:35
- Forum: Other questions
- Topic: Is it possible to create a "mod" for Xpadder?
- Replies: 10
- Views: 9406
Re: Is it possible to create a "mod" for Xpadder?
My Problem is, that a two way set changer on hold, it is not adjustable whether the set is changing on tap or release. So it happens that i end up in the wrong set, because the set changes on trigger release, but it should only be activated on tap/hold. Including the setchanging function in the assi...
- 15 Apr 2013, 12:29
- Forum: Xpadder not working in game
- Topic: Call of duty mw2
- Replies: 1
- Views: 3073
Re: Call of duty mw2
You has started xpadder with administrator rights?
- 14 Apr 2013, 07:54
- Forum: Sets
- Topic: Feedback for set selectors
- Replies: 14
- Views: 14458
Re: Feedback for set selectors
Autohotkey/Autoit is capable to use gui elements, maybe it is possible to create an overlay display to show which set is active?
Instead of beep sounds or playing soundfiles, show a text.
Instead of beep sounds or playing soundfiles, show a text.
- 13 Apr 2013, 20:47
- Forum: How do I do this combo/sequence?
- Topic: hierachy of the commands/events
- Replies: 9
- Views: 8898
Re: hierachy of the commands/events
Darkitow's solution works great.
thanks for the help
thanks for the help
- 13 Apr 2013, 06:42
- Forum: How do I do this combo/sequence?
- Topic: hierachy of the commands/events
- Replies: 9
- Views: 8898
Re: hierachy of the commands/events
Thanks for the replies , i will test it this evening.
- 12 Apr 2013, 11:03
- Forum: How do I do this combo/sequence?
- Topic: hierachy of the commands/events
- Replies: 9
- Views: 8898
Re: hierachy of the commands/events
On trigger tap it should activate one key but only once, and on release the same key only once.
But by 95% and above it should activate another key, this key should be activ so long as i press the trigger above 95%.
Like an antitoggle + distance zone.
But by 95% and above it should activate another key, this key should be activ so long as i press the trigger above 95%.
Like an antitoggle + distance zone.
- 12 Apr 2013, 08:20
- Forum: How do I do this combo/sequence?
- Topic: hierachy of the commands/events
- Replies: 9
- Views: 8898
Re: hierachy of the commands/events
My Problem at the moment is, that a tap-time-slot at the start of a assignment influenced all following slots. https://dl.dropboxusercontent.com/u/47731937/tap_time_zone.jpg Cycle 1/1 HoldZone 1/1 (if button down for 0.01s+) DistanceZone 1/2 (if button moved 1%>94%) Stage 1/1 (1 element) Tap for 0.0...
- 12 Apr 2013, 07:23
- Forum: How do I do this combo/sequence?
- Topic: hierachy of the commands/events
- Replies: 9
- Views: 8898
hierachy of the commands/events
Hi i have a question about the hierachy of the commands in a assignment. A assignment always starts on the left and ends on the right of all events and that in a chronological order? Exist a way to get a hierachy of events like that (it's only an example): ( X, HOLD ZONE 0.31s, Y ) DISTANCE ZONE 85%...
- 11 Apr 2013, 19:26
- Forum: Deutsch
- Topic: Anti-Toogle + Distanzzone wie?
- Replies: 0
- Views: 2658
Anti-Toogle + Distanzzone wie?
Hi ich nutze das Antitoggle schon eine Weile und es funktioniert bestens, nun würde ich gerne noch eine Distanzzone hinzufügen, leider fruchten meine Versuche nicht so richtig. Es handelt sich um Dayz einem Mod für Arma2, hier benutze ich den Antitoggle auf dem linken Trigger, um in das Visier einer...
- 08 Apr 2013, 20:17
- Forum: How do I do this combo/sequence?
- Topic: Assign 2 buttons on controller to 1 key
- Replies: 7
- Views: 7451
Re: Assign 2 buttons on controller to 1 key
You can switch with L3 to a second set and bind the R3 Key with the "`" in the second set.
- 08 Apr 2013, 20:13
- Forum: Sets
- Topic: How to make a Set Stick in Xpadder
- Replies: 5
- Views: 5072
Re: How to make a Set Stick in Xpadder
The best way is to use one profil per game.
- 07 Apr 2013, 17:43
- Forum: Game Profiles
- Topic: Arma 2 - DayZ (X360)
- Replies: 6
- Views: 8179
Arma 2 - DayZ (X360)
Here is my DayZ Setup: Update v1.1: - added score on hold on the back button - CoD like Optics, ironsights on hold left trigger, zoom at trigger distance about 99% + while held glitch workaround - in freelook mode no ironsights on left trigger, only zoom Set1 = Standard Set with common keybindings S...
- 16 Sep 2012, 10:58
- Forum: Deutsch
- Topic: Satz umschalten nur auf Klick und nicht auf Hold
- Replies: 2
- Views: 3166
Re: Satz umschalten nur auf Klick und nicht auf Hold
Ok, also wird bei Hold der Satzwechsel verhindert, auf klick funktioniert er aber weiterhin?
EDIT:
Danke dir, ich habe es gleich einmal getestet und es scheint super zu funktionieren
EDIT:
Danke dir, ich habe es gleich einmal getestet und es scheint super zu funktionieren
- 16 Sep 2012, 09:03
- Forum: Deutsch
- Topic: Satz umschalten nur auf Klick und nicht auf Hold
- Replies: 2
- Views: 3166
Satz umschalten nur auf Klick und nicht auf Hold
Hi Leute ich würde gerne einen 2 Wege Satzumschalter auf dem linken Trigger benutzen. Es soll der Satz nur umgeschaltet werden, wenn der Trigger kurz gedrückt wird, was auch funktioniert, allerdings macht er das gleiche auch wenn der Trigger gehalten und wieder los gelassen wird. Ich möchte aber den...