Hello
I am making a profile for POE, when i try to use the left anlogstick to walk around, i found the spring mode fly the mouse right to the edge of the screen and i couldn't find a way to limit the range of the mouse goes.
Is there a way to make this happen? It will be much easier to control the movement and also picking up item
"sorry for my bad english "
Best regrads
Mat
Making the mouse spring in range
Re: Making the mouse spring in range
The Mouse Spring mode is fixed at 100% of the screen.
It may be possible to add Distance Zones to limit how far the stick can move and be reacted to but this was never intended to be used with Mouse Spring and the results are far from perfect
You can Copy the Profile below and Paste it into Xpadder using the Profile Menu button
It may be possible to add Distance Zones to limit how far the stick can move and be reacted to but this was never intended to be used with Mouse Spring and the results are far from perfect
You can Copy the Profile below and Paste it into Xpadder using the Profile Menu button
Code: Select all
;--- Xpadder Profile Data ---
DataType=Profile
Version=2020.05.01
Name=(Untitled profile)
Set1Stick1UpSlots=Mouse Move Up,DISTANCE ZONE 50%
Set1Stick1UpMouseSpeed=32
Set1Stick1UpMouseMode=Spring
Set1Stick1RightSlots=Mouse Move Right,DISTANCE ZONE 50%
Set1Stick1RightMouseSpeed=32
Set1Stick1RightMouseMode=Spring
Set1Stick1DownSlots=Mouse Move Down,DISTANCE ZONE 50%
Set1Stick1DownMouseSpeed=32
Set1Stick1DownMouseMode=Spring
Set1Stick1LeftSlots=Mouse Move Left,DISTANCE ZONE 50%
Set1Stick1LeftMouseSpeed=32
Set1Stick1LeftMouseMode=Spring
Re: Making the mouse spring in range
Thank you so much Jonathan, will give this a try later!
Jonathan wrote: ↑13 Sep 2020, 09:31The Mouse Spring mode is fixed at 100% of the screen.
It may be possible to add Distance Zones to limit how far the stick can move and be reacted to but this was never intended to be used with Mouse Spring and the results are far from perfect
You can Copy the Profile below and Paste it into Xpadder using the Profile Menu button
Code: Select all
;--- Xpadder Profile Data --- DataType=Profile Version=2020.05.01 Name=(Untitled profile) Set1Stick1UpSlots=Mouse Move Up,DISTANCE ZONE 50% Set1Stick1UpMouseSpeed=32 Set1Stick1UpMouseMode=Spring Set1Stick1RightSlots=Mouse Move Right,DISTANCE ZONE 50% Set1Stick1RightMouseSpeed=32 Set1Stick1RightMouseMode=Spring Set1Stick1DownSlots=Mouse Move Down,DISTANCE ZONE 50% Set1Stick1DownMouseSpeed=32 Set1Stick1DownMouseMode=Spring Set1Stick1LeftSlots=Mouse Move Left,DISTANCE ZONE 50% Set1Stick1LeftMouseSpeed=32 Set1Stick1LeftMouseMode=Spring