second controller not reckognized.

Post Reply
erikgoetheer
Posts: 2
Joined: 09 Sep 2010, 08:03

second controller not reckognized.

Post by erikgoetheer »

I have got an New Astro City arcade cab with a 2P6B control panel. At the cab there is a mame PC (Mametopia) attached, which has two identical virtual joysticks programmed. Xpadder only identifies the first (left) stick and buttons, but not the right stick and buttons. They are reckognized in the window control panel however and working properly.

Why doesn't xpadder reckognize the second identical controller? Joytokey does. So now I'm using joytokey for assigining keystrokes to both sticks and buttons, and only use xpadder for the 'add hold zone' on one button (to realize this: http://xpadder.com/forum4/viewtopic.php?f=56&t=1928).

SGTCableDog
Xpadder Xpert
Posts: 1118
Joined: 27 Aug 2009, 03:35
Location: Minnesota, USA
Contact:

Re: second controller not reckognized.

Post by SGTCableDog »

There is an issue with the way Xpadder enumerates certain controllers or something like that. Jonathan is aware and investigating a solution.

erikgoetheer
Posts: 2
Joined: 09 Sep 2010, 08:03

Re: second controller not reckognized.

Post by erikgoetheer »

OK, then I just have to wait for the solution. And fortunately the combination JoytoKey with xpadder does everything I need.

Post Reply

Return to “Other questions”