problem with IMON software

Post Reply
vinh_nguyen_90250
Posts: 2
Joined: 31 Mar 2011, 04:26

problem with IMON software

Post by vinh_nguyen_90250 »

I have ANTEC 350 FUSION CASE with remote control using IMON software.the problem is when I start Xpadder, the IMON stop working and also Xpadder disconected and then conected( like you switch ON/Off all the time), there is the sound BIP...when it disconected.I use windows 7 ultimate 64-bit.and every time Xpadder disconected, the USB composite devices flashing. I could'not find anything wrong.any one have any ideas , Please help me. Thanks

Jonathan
Xpadder creator
Posts: 1622
Joined: 24 Aug 2009, 11:33
Location: England
Contact:

Re: problem with IMON software

Post by Jonathan »

This is a known problem with the IMON driver. In the Xpadder options disable the "Automatically detect new controllers" option.

vinh_nguyen_90250
Posts: 2
Joined: 31 Mar 2011, 04:26

Re: problem with IMON software

Post by vinh_nguyen_90250 »

Thanks Jonathan, but I could not find" Automatically detect new controllers" in option menu , or any where.and my problem is not solved.could you help me with more details. Thanks a lot.

SGTCableDog
Xpadder Xpert
Posts: 1118
Joined: 27 Aug 2009, 03:35
Location: Minnesota, USA
Contact:

Re: problem with IMON software

Post by SGTCableDog »

Click the wrench in the top right of the main Xpadder window to open the settings.

Image

The options have changed but the setting will be the fourth item under "Running".

Jonathan
Xpadder creator
Posts: 1622
Joined: 24 Aug 2009, 11:33
Location: England
Contact:

Re: problem with IMON software

Post by Jonathan »

This is a new option so make sure you are using the latest version here

Post Reply

Return to “Other questions”