Controller: Playstation 3 Dualshock 3
Drivers: MotionJoy (Current)
Mode: X-Box 360 Mode-Default profile
Hi, I have noticed that when using xpadder with a joystick configured to mouse mode with spring mode active, if you Joystick Flick, that is tilt and let go instead of manually re-centering it, that once the controller reaches 0,0 the program stops moving the mouse cursor even if it hasn't caught up to the 0,0 position.
If any of this post needs clarification please just let me know, I am even willing to record an example and upload to youtube for you if you can recommend a good and free recording app.
Thank you for your time,
Steph
"Joystick Flicking"
-
- Xpadder Xpert
- Posts: 2437
- Joined: 09 Feb 2010, 16:41
- Location: Germany
- Contact:
Re: "Joystick Flicking"
If you add a 0.01 Release Zone followed by two opposite mouse direction for each direction, it works perfectly.
Code: Select all
;--- Xpadder Profile Data ---
DataType=Profile
Version=2012.05.01
Name=(Untitled profile)
Set1StickDiagonalSizes=45,89
Set1Stick2UpSlots=Mouse Move Up,RELEASE ZONE 0.01s,Mouse Move Up,Mouse Move Down
Set1Stick2UpMouseSpeed=32
Set1Stick2UpMouseMode=Spring
Set1Stick2RightSlots=Mouse Move Right,RELEASE ZONE 0.01s,Mouse Move Left,Mouse Move Right
Set1Stick2RightMouseSpeed=32
Set1Stick2RightMouseMode=Spring
Set1Stick2DownSlots=Mouse Move Down,RELEASE ZONE 0.01s,Mouse Move Up,Mouse Move Down
Set1Stick2DownMouseSpeed=32
Set1Stick2DownMouseMode=Spring
Set1Stick2LeftSlots=Mouse Move Left,RELEASE ZONE 0.01s,Mouse Move Left,Mouse Move Right
Set1Stick2LeftMouseSpeed=32
Set1Stick2LeftMouseMode=Spring
-
- Posts: 2
- Joined: 18 Nov 2012, 00:08
Re: "Joystick Flicking"
Okay, that does indeed work, thank you. As a total newb I feel compelled to ask, is there any way to add the release zone in the GUI settings, cause I'm not seeing that anywhere.
Thank you for your time,
Steph
Thank you for your time,
Steph
-
- Xpadder Xpert
- Posts: 2437
- Joined: 09 Feb 2010, 16:41
- Location: Germany
- Contact:
Re: "Joystick Flicking"
You need to click on the button "Advanced..." in the lower right of the Assignment window. More informations about Advanced Assignments are here.