Just bought a Logitech Rumblepad 2 and trying to configure for use with World of Warcraft, (WoW). Using the D-pad as the primary movement device, but with custom settings for each angle, since the way WoW works, 2D movement via mouse, (which is _much_ faster than movement via WASD, hence why I bought the controller) is accomplished as follows:
Forward: [mouse L button] + [mouse R button]
Left: [mouse L button] + [mouse R button] + [mouse L movement]
Right: [mouse L button] + [mouse R button] + [mouse R movement]
Back: S
Have each direction correctly set via Advanced, but the L and R mouse movement is _way_ too sensitive, even when I've turned the emulation sensitivity all the way down to 1, (affects only D-pad - sensitivity seems to work fine on the sticks). And while I certainly was looking for a higher degree of agility for pvp combat, spinning like a psychotic top isn't quite what I had in mind! Is there something I'm doing incorrectly?
Thanks,
Dylan
Problem with D-pad sensitivity on Logitech
-
- Xpadder Xpert
- Posts: 1118
- Joined: 27 Aug 2009, 03:35
- Location: Minnesota, USA
- Contact:
Re: Problem with D-pad sensitivity on Logitech
Are you adjusting the emulation speed of the mouse of the Dpad by clicking wrench to the lower right of the Dpad choosing mouse settings?
Re: Problem with D-pad sensitivity on Logitech
Yep - can get the sensitivity settings to work with the 2 analog sticks, but no joy on the D-pad.
-
- Xpadder Xpert
- Posts: 1118
- Joined: 27 Aug 2009, 03:35
- Location: Minnesota, USA
- Contact:
Re: Problem with D-pad sensitivity on Logitech
I've just created the Dpad assignments from your first post and I am able to open the Dpads mouse settings window and change the emulation speed. It tests just fine. The mouse emulation speed will only appear when there is a mouse movement assigned. You can also adjust the mouse settings from the Assignment window also, there is a wrench for the mouse in the assignment window.
Which version of Xpadder are you using? I'm using 5.5Beta2. I'll check with that version.
Which version of Xpadder are you using? I'm using 5.5Beta2. I'll check with that version.