If no controller is connected (or it is but not configured correctly) you will see this screen:
This shows that Xpadder is searching for a controller. Connect your controller now and the screen will change to this:
If you have connected your controller you will need to first install the drivers for the controller before Xpadder or Windows can use it.
For more help on installing your controller see here
If this topic does not answer your question or does not give enough information then please post here
The replies you receive will be used to update this topic for the future
If you have a problem using Xpadder then you can read and ask for help here...
1 post • Page 1 of 1