1.Load the following profile and open the form.
Code: Select all
;--- Xpadder Profile Data ---
DataType=Profile
Version=2012.01.19
Name=form profile for converter
KeyTapTime=4
Set1DPadMode=FourWay
Set1Button1Name=1
Set1Button1Slots=Home,PAUSE 0.01s,Tab
Set1Button2Name=2
Set1Button2Slots=Home,PAUSE 0.00s,2,PAUSE 0.01s,Tab
Set1Button3Name=3
Set1Button3Slots=Home,PAUSE 0.00s,3,PAUSE 0.01s,Tab
Set1Button4Name=4
Set1Button4Slots=Home,PAUSE 0.00s,4,PAUSE 0.01s,Tab
Set1Button5Name=5
Set1Button5Slots=Home,PAUSE 0.00s,5,PAUSE 0.01s,Tab
Set1Button6Name=6
Set1Button6Slots=Home,PAUSE 0.00s,6,PAUSE 0.01s,Tab
Set1Button7Name=7
Set1Button7Slots=Home,PAUSE 0.00s,7,PAUSE 0.01s,Tab
Set1Button8Name=8
Set1Button8Slots=Home,PAUSE 0.00s,8,PAUSE 0.01s,Tab
Set1Button9Name=9
Set1Button9Slots=Home,PAUSE 0.00s,9,PAUSE 0.01s,Tab
Set1Button10Name=10
Set1Button10Slots=Home,PAUSE 0.00s,1,PAUSE 0.00s,0,PAUSE 0.01s,Tab
Set1Button11Name=11
Set1Button11Slots=Tab,PAUSE 0.01s,Home,PAUSE 0.00s,1,PAUSE 0.00s,1
Set1Button12Name=12
Set1Button12Slots=Tab,PAUSE 0.01s,Home,PAUSE 0.00s,1,PAUSE 0.00s,2
Set1Button13Name=13
Set1Button13Slots=Tab,PAUSE 0.01s,Home,PAUSE 0.00s,1,PAUSE 0.00s,3
Set1Button14Name=14
Set1Button14Slots=Tab,PAUSE 0.01s,Home,PAUSE 0.00s,1,PAUSE 0.00s,4
Set1DPadUpName=up
Set1DPadUpSlots=Left Shift,Tab
Set1DPadRightName=Submit (hold)
Set1DPadRightSlots=HOLD ZONE 0.70s,Enter,HOLD ZONE 0.10s
Set1DPadDownName=down, start typing
Set1DPadDownSlots=Tab
Set1TriggerLeftName=analogue
Set1TriggerLeftSlots=Home,PAUSE 0.00s,A,PAUSE 0.01s,Tab
Set1TriggerRightName=analogue
Set1TriggerRightSlots=Home,PAUSE 0.00s,A,PAUSE 0.01s,Tab
3.Then press DPad down once and start pressing the stated buttons. Under the name of each button is a explanation of it, if you shouldn't know where this button is located on the Xbox360pad. Xpadder will select the number of this button and causes automatically to switch to the next button. If you should have made a mistake, then you can use the Dpad (up and down) to go back to this button to change it.
4.When your are done with all buttons, the "Send" button should be selected. So simply hold Dpad right to send the data.