The RT key on the Xbox handle is always active

Post Reply
bdh248
Posts: 10
Joined: 25 Feb 2014, 09:24

The RT key on the Xbox handle is always active

Post by bdh248 »

Image
:?:
It seems that only in xpadder can this problem occur.
I don't know what's going on.
There was no such problem before, but recently.
I use win7 system.
I have confirmed in the stand-alone game that the handle is normal and there is no problem with the RT key.
Does anyone know where the problem is?
Last edited by bdh248 on 22 Apr 2020, 16:40, edited 1 time in total.

Mobeeuz
Xpadder Xpert
Posts: 238
Joined: 19 Feb 2010, 21:37
Contact:

Re: The RT key on the Xbox handle is always active

Post by Mobeeuz »

When you say you can confirm it in the stand alone game, I assume it must have controller support already. If you are trying to remap the controller trigger to something else, it may be conflicting with the built-in gamepad support. Make sure you are running Xpadder as administrator and/or see if you can disable the in-game gamepad and remap to keyboard commands instead.

bdh248
Posts: 10
Joined: 25 Feb 2014, 09:24

Re: The RT key on the Xbox handle is always active

Post by bdh248 »

Image
:roll:
Hello, this is the situation.
Without running the game, I found that the RT key was always activated in xpadder.
The RT key in the xpadder is always green.

Then I entered a single game for testing, and found that the RT key is normal in the game, not always activated.
This stand-alone game supports the controller. At this time, I did not run xpadder.
I have also opened the performance test interface of win7's own handle, which also shows that the handle is normal and RT key is not always activated.

So I can confirm that only in xpadder, RT key is in abnormal state and is always activated.

Mobeeuz
Xpadder Xpert
Posts: 238
Joined: 19 Feb 2010, 21:37
Contact:

Re: The RT key on the Xbox handle is always active

Post by Mobeeuz »

The Z Axis should be centered, not 0 and not 100 - with or without Xpadder. What kind of controller is this, and do you have another to test with?

bdh248
Posts: 10
Joined: 25 Feb 2014, 09:24

Re: The RT key on the Xbox handle is always active

Post by bdh248 »

This is the Xbox 360 handle controller.
As shown in the picture, the default position of Z axis is roughly in the middle.
This shows that the RT key of the handle controller is OK.

As I said before, when xpadder is turned off, I will enter the stand-alone game test. The RT key can also be used normally in the game, and it has not been activated all the time.
This single game is <Monster Hunter>.

I believe that all of these can show that the handle controller is completely OK, but it is always activated in the xpadder.
I want to know where the problems are and how to solve them.

bdh248
Posts: 10
Joined: 25 Feb 2014, 09:24

Re: The RT key on the Xbox handle is always active

Post by bdh248 »

In order to further confirm my idea.
I even tried using steam as the handle controller mapping tool.
I use steam to map this controller to play games.

The game is an online game called < Guild Wars >.
The game itself does not support controller controllers.
In the steam mapping environment, I found that the RT key of the handle controller is also normal.

At this point, I'm almost sure that the problem should be with xpadder.

kmw350
Posts: 4
Joined: 28 Dec 2012, 12:53

Re: The RT key on the Xbox handle is always active

Post by kmw350 »

bdh248 wrote:
At this point, I'm almost sure that the problem should be with xpadder.

What happens if you disable the triggers in XPadder? All the other buttons will still work and be programmable, and maybe the game can use the triggers ok without being assigned in Xpadder?.

Mobeeuz
Xpadder Xpert
Posts: 238
Joined: 19 Feb 2010, 21:37
Contact:

Re: The RT key on the Xbox handle is always active

Post by Mobeeuz »

Can you post a picture of your controller properties page in xpadder? It's right under settings.

bdh248
Posts: 10
Joined: 25 Feb 2014, 09:24

Re: The RT key on the Xbox handle is always active

Post by bdh248 »

kmw350 wrote:
bdh248 wrote:
At this point, I'm almost sure that the problem should be with xpadder.

What happens if you disable the triggers in XPadder? All the other buttons will still work and be programmable, and maybe the game can use the triggers ok without being assigned in Xpadder?.
:?:
You mean disable xpadder?

Don't open the game, just open xpadder.
In this case, the RT key is displayed as always active.
Without opening xpadder, use the handle controller in other environments.
At this point, the RT key is in the normal state.

I think it's clear. The problem is just with xpadder.
The problem now is that xpadder is no longer available, unless I don't use the RT key.
It has nothing to do with any games.

In fact, now I've stopped using xpadder.
That's why I'm here to help.

bdh248
Posts: 10
Joined: 25 Feb 2014, 09:24

Re: The RT key on the Xbox handle is always active

Post by bdh248 »

Mobeeuz wrote:Can you post a picture of your controller properties page in xpadder? It's right under settings.
Image
:?:
Do you mean this kind of picture?
You see, the RT key is always active.

bdh248
Posts: 10
Joined: 25 Feb 2014, 09:24

Re: The RT key on the Xbox handle is always active

Post by bdh248 »

:roll:
Oh!There has been new progress.

I connected to the computer with another Xbox 360 controller.
I found that the handle controller is completely normal, including in the xpadder.

I think there was something wrong with the Xbox 360 controller at the beginning. This controller has been used for a long time.
It's just that it's a strange question. Outside of xpadder, everything is normal.

But anyway, I can continue to use xpadder, just another handle controller.

Thank you for your attention!

Post Reply

Return to “Problems detecting controller buttons, triggers or other”