Xadder no longer working after new windows install

Post Reply
number45_
Posts: 1
Joined: 27 Dec 2014, 14:11

Xadder no longer working after new windows install

Post by number45_ »

I used the DS4 to XInput mapper and xpadder so I could use my dualshock 4 controller in battlefield 3. It used to work fine, I found a profile and controller file that enabled me to toggle sprint so it worked the same way as the console version (as there is no way to change to toggle in game).

Recently I upgraded my HDD so re-installed windows and the game. DS4tool and xpadder along with the related files were on another drive so I assumed everything would work as it had been however that is not the case. The sprint toggle no longer seems to work.

These are the files I was using that used to work.

Code: Select all

;----------------------
; Xpadder Profile File
;----------------------

Version=2010.06.03

[Profile Settings]
KeyTapTime=1

[Set Settings]
Set1StickDeadZones=30,30
Set1Stick1Mode=Vertical
Set2StickDeadZones=30,30
Set2Stick1Mode=Vertical
Set3StickDeadZones=30,30
Set4StickDeadZones=30,30
Set5StickDeadZones=30,30
Set6StickDeadZones=30,30
Set7StickDeadZones=30,30
Set8StickDeadZones=30,30

[Assignments]
Set1Button5Name=L1
Set1Button5SetSelect=1
Set1Button6Name=R1
Set1Button6SetSelect=1
Set1Button9Name=L3
Set1Button9Slots=Left Shift
Set1Button9Toggle=1
Set1Stick1UpName=Up Wide
Set1Stick1UpSlots=RELEASE ZONE 0.10s
Set1Stick1UpSetSelect=1
Set1Stick1RightName=Right
Set1Stick1DownName=Down Wide
Set1Stick1DownSetSelect=1
Set1Stick1LeftName=Left
Set2Button5SetSelect=0
Set2Button6SetSelect=0
Set2Button9Slots=Left Shift
Set2Button9Toggle=1
Set2Stick1UpSetSelect=0
Set2Stick1DownSetSelect=0

Code: Select all

;------------------------
; Xpadder Controller File
;------------------------

Version=2010.06.03

[Button Locations]
Button5Location=68,51
Button6Location=397,53
Button7Location=206,182
Button9Location=36,190
Stick1UpLocation=36,158
Stick1RightLocation=68,190
Stick1DownLocation=36,222
Stick1LeftLocation=4,190

[Access]
Stick1XAccess=Axis X
Stick1YAccess=Axis Y

[Names]
Button5Name=Button 5
Button6Name=Button 6
Button7Name=Button 7
Button9Name=Button 9
Stick1Name=Stick 1
StickUpName=Up
StickRightName=Right
StickDownName=Down
StickLeftName=Left

[Image]
I have also tried the profile mentioned in this thread http://xpadder.com/forum4/viewtopic.php?f=180&t=3957

Can anyone shed any light on why this profile no longer seems to work. Or how I can get sprint in BF3 to work the same as the console version.

Post Reply

Return to “Xpadder not working in game”