Sorry for my english, google helped me...
I want to make an economy usb card, and I need a lot of functions.
I want to make a function is triggered by the simultaneous pressing of two buttons.
I know Xpadder allows you to associate macros with a single button, but in reverse I seek a solution.
With two buttons, we have a single function, with three button, we have 3, with 4 button, we have 6 possible conbinaisons, etc..
My goal is to control the CDU and the UFC in the simulator DCS A10C. Both panels contain 97 functions. So, either I invested in several usb cards and each card entry is associated with a function or I find a way to ensure a function is activated by the simultaneous support of two of my entries USB card. it suffices to book 15 entries on my usb card usb. The economy in terms of equipment is obvious. The problem is that I can not find a way to implement this little theory ...
I would therefore like:
BTN1 pressed = no function
BTN2 pressed = no function
...
BTN1 + BTN2 = function 1 =
BTN1 + btn3 = function 2
...
if someone has an idea ...
thank you
Sandjo
[help] two bouton for one function ??
-
- Xpadder Xpert
- Posts: 2437
- Joined: 09 Feb 2010, 16:41
- Location: Germany
- Contact:
-
- Posts: 3
- Joined: 02 Nov 2011, 18:38
Re: [help] two bouton for one function ??
Cool !!!
8 Set, so one main set, seven for selection, 7*14=98, so with 7+14=21 entries, on my usb card, I can have 98 functions...
Thank´you vert much.
Tchouss
SandJo
8 Set, so one main set, seven for selection, 7*14=98, so with 7+14=21 entries, on my usb card, I can have 98 functions...
Thank´you vert much.
Tchouss
SandJo