Combining two mouse operations.

Post Reply
coryikeilo84
Posts: 1
Joined: 02 Oct 2012, 05:37

Combining two mouse operations.

Post by coryikeilo84 »

I want to play Guild Wars 2 with my 360 controller. For the most part I have things set up; however, I want it to feel like any fps on the 360.
I can't quite figure out how to do a combination between mouse movement and right click. Any help would be appreciated!!

Also if you have a build for GW2, I'd be interested in that as well.

Oke_Doke
Xpadder Xpert
Posts: 327
Joined: 21 Dec 2009, 16:17
Location: jupiter
Contact:

Re: Combining two mouse operations.

Post by Oke_Doke »

After assigning a mouse to a stick you can add a right click to each direction manually.

Click on a stick direction in Xpadder and then the "Advanced..." button to open the Advanced Assignment window. Then add a "Right Mouse Button" slot to the sequence next to the Mouse Move [Direction] slot, then click Ok. Repeat this for each direction.

Here's an example profile with mouse direction and right click bound together on Stick 2.

Code: Select all

;--- Xpadder Profile Data ---
DataType=Profile
Version=2012.05.01
Name=(double bind example)
Set1Stick2UpSlots=Mouse Move Up,Right Mouse Button (2)
Set1Stick2UpMouseSpeed=32
Set1Stick2RightSlots=Mouse Move Right,Right Mouse Button (2)
Set1Stick2RightMouseSpeed=32
Set1Stick2DownSlots=Mouse Move Down,Right Mouse Button (2)
Set1Stick2DownMouseSpeed=32
Set1Stick2LeftSlots=Mouse Move Left,Right Mouse Button (2)
Set1Stick2LeftMouseSpeed=32
Of course there are other ways of accomplishing the control scheme your seeking. Although I haven't tried any of them and so can't recommend any specific profile, I know there are a number of GW2 profiles already floating around the forums. Hope this helps in your hunt.

Post Reply

Return to “How do I do this combo/sequence?”