Button combo help

Post Reply
mattshanahan
Posts: 2
Joined: 03 May 2014, 18:51

Button combo help

Post by mattshanahan »

Using a xbox 360 controller I have x,y,b assigned to keyboard 1,2,3.

I want to use RB to modify them to be 4,5,6 while RB is held.

I assigned RB to use set 2 when held and assigned x,y,b to 4,5,6 in set 2 it looks like it works in the xpadder itself but when I go to use it in the game it still uses 1,2,3

Any suggestions?

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: Button combo help

Post by Primal Fear »

Open notepad and test the input there. If it doesn't work correctly there too, please post your profile, by opening the profile menu (the one on the right side) , clicking on "Copy" and pasting the profile here in a new post.

mattshanahan
Posts: 2
Joined: 03 May 2014, 18:51

Re: Button combo help

Post by mattshanahan »

ok in notepad it acts like it was assigned to button 4

here is profile currently

Code: Select all

;--- Xpadder Profile Data ---
DataType=Profile
Version=2014.01.01
Name=wildstar
Set1Button1Slots=Space
Set1Button2Slots=3
Set1Button3Slots=1
Set1Button4Slots=2
Set1Button5Slots=R
Set1Button6SetSelect=1
Set1Button7Slots=X
Set1Button8Slots=Left Mouse Button (1)
Set1DPadUpSlots=M
Set1DPadRightSlots=C
Set1DPadDownSlots=V
Set1DPadLeftSlots=F
Set1Stick1UpSlots=W
Set1Stick1RightSlots=D
Set1Stick1DownSlots=S
Set1Stick1LeftSlots=A
Set1Stick2UpSlots=Mouse Move Up
Set1Stick2UpMouseSpeed=32
Set1Stick2RightSlots=Mouse Move Right
Set1Stick2RightMouseSpeed=32
Set1Stick2DownSlots=Mouse Move Down
Set1Stick2DownMouseSpeed=32
Set1Stick2LeftSlots=Mouse Move Left
Set1Stick2LeftMouseSpeed=32
Set1TriggerLeftSlots=Tab
Set1TriggerRightSlots=Left Shift
Set2Button1Slots=7
Set2Button2Slots=6
Set2Button3Slots=4
Set2Button4Slots=5
Set2Button6SetSelect=0
Set2Button7Slots=8

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: Button combo help

Post by Primal Fear »

There is no problems with the profile. The only problem I could think of is that you were in Set2 when starting the game, so pressing RB would lead you from Set2 to Set1 instead of the other way around. Minimizing Xpadder before starting the game would automatically make sure that Xpadder is in Set1 (presumed that "Return to Set1 after minimize/restore" is still activated in the Xpadder settings), or of course you can also switch back manually before opening the game.

Alternatively you can have a look at the two possible while held glitch workarounds here, that would automatically to the correct direction when pressing the button.

Post Reply

Return to “How do I do this combo/sequence?”