2 controllers in one cord

Post Reply
Curiko
Posts: 2
Joined: 03 Mar 2015, 00:44

2 controllers in one cord

Post by Curiko »

I have 2 controllers connected to one cord.
Which means that from the USB it connect to an controller, then the cord goes further from that to the second controller.

Xpadder will only configure the second controller.
When i try to config the first controller it wont accept any of the sticks or buttons.

Can someone help me?

This is what i have.
http://www.pricerunner.dk/pl/165-282510 ... ign-Priser

My main problem is that the second controller, which is the only one it allows me to configure, is broken.

Is goes kinda like this. USB-----Controller-----Controller
Where the ----- is the cord.

EyeDeeNo76
Posts: 22
Joined: 04 Aug 2014, 23:13
Location: 97km north of New York City.

Re: 2 controllers in one cord

Post by EyeDeeNo76 »

To me that sounds like an odd setup two gamepads daisy chained. I would 1. Take apart the pad that the USB cord goes to fist identify and disconnect the second pad from the circuit board leaving the first the only one on the USB cord. 2. Toss it in the garbage and get a known name brand gamepad.

Curiko
Posts: 2
Joined: 03 Mar 2015, 00:44

Re: 2 controllers in one cord

Post by Curiko »

I bought it this way on purpose. So im not gonna do that.
I need Xpadder to work with these 2 controllers.

Post Reply

Return to “Multiplayer/multi-controller problems”