problems with setting up the analog
-
n64axisnerd
problems with setting up the analog
Hi im trying to xpadd my bigben ps3 controller that works for pc to use on zelda ocarina of time.ive configured all buttons but when i get to the trigger part something make it go totally wrong for example when i push detect and then push the triggers where im supposed to the don respond can i do this manually its a six axis controller and desperate!
Re: problems with setting up the analog
Go into options and uncheck "use Xinput (if installed)". That should fix your problem.
Re: problems with setting up the analog
XInput is for Xbox 360 controllers only so disabling will probably not help in this case.
From the Controller menu (the one where you clicked New to create your controller layout in the first place) there is an option near the bottom called "Properties" or maybe "Details" if you have an older version.
In there you can see the data from the controller and how the buttons and triggers alter it.
Press the trigger and see which green bar changes... we'll be able to help more once we know how the trigger is altering the data.
From the Controller menu (the one where you clicked New to create your controller layout in the first place) there is an option near the bottom called "Properties" or maybe "Details" if you have an older version.
In there you can see the data from the controller and how the buttons and triggers alter it.
Press the trigger and see which green bar changes... we'll be able to help more once we know how the trigger is altering the data.