Help with Codes

Post Reply
not_mudge
Posts: 3
Joined: 21 Sep 2011, 11:35

Help with Codes

Post by not_mudge »

Looking at a config i wanted, the guy listed this:

Code: Select all

;--- Xpadder Profile File ---
DataType=Profile
Version=2010.11.17
Name=Star Wars Knights of the Old Republic XInput

[Set Settings]
Set1StickDeadZones=78,64
Set1DPadMode=FourWay

[Assignments]
Set1Button1Name=Interact/Std Wpn Pwr
Set1Button1Slots=Enter,R
Set1Button2Name=Off. Pwr/Stealth
Set1Button2Slots=RELEASE ZONE 0.01s,2,RELEASE ZONE 1.30s,HOLD ZONE 1.30s,G
Set1Button3Name=Wpn. Pwr
Set1Button3Slots=RELEASE ZONE 0.01s,1,RELEASE ZONE 1.30s,HOLD ZONE 1.30s,X
Set1Button4Name=Cancel Attack
Set1Button4Slots=RELEASE ZONE 0.01s,Y,RELEASE ZONE 1.30s,HOLD ZONE 1.30s,F
Set1Button5Name=Switch Char/Solo Mode
Set1Button5Slots=RELEASE ZONE 0.01s,Tab,RELEASE ZONE 1.00s,HOLD ZONE 1.00s,V
Set1Button6Name=Click
Set1Button6Slots=Left Mouse Button (1)
Set1Button7Name=Pause/QLoad
Set1Button7Slots=RELEASE ZONE 0.01s,Space,RELEASE ZONE 1.00s,HOLD ZONE 2.75s,F5,HOLD ZONE 0.20s
Set1Button8Name=Menu/Close/QSave
Set1Button8Slots=RELEASE ZONE 0.01s,Escape,RELEASE ZONE 2.00s,HOLD ZONE 1.50s,F4,HOLD ZONE 0.20s
Set1Button9Name=Pause
Set1Button9Slots=Space
Set1Button10Slots=Right Mouse Button (2)
Set1Button10Toggle=1
Set1DPadUpName=Grenade/Mine
Set1DPadUpSlots=RELEASE ZONE 0.01s,3,Arrow Up,RELEASE ZONE 1.30s,HOLD ZONE 1.30s,7
Set1DPadRightName=Med Pack
Set1DPadRightSlots=5,Arrow Right
Set1DPadDownName=Non-Medical Item
Set1DPadDownSlots=6,Arrow Down
Set1DPadLeftName=Def. Power
Set1DPadLeftSlots=4,Arrow Left
Set1Stick1UpName=Walk/Run
Set1Stick1UpSlots=W,Arrow Up,Mouse Wheel Up,B,DISTANCE ZONE 60%,W,Arrow Up,Mouse Wheel Up
Set1Stick1RightSlots=C,Arrow Right,B,DISTANCE ZONE 60%,C,Arrow Right
Set1Stick1DownSlots=S,Arrow Down,Mouse Wheel Down,B,DISTANCE ZONE 60%,S,Arrow Down,Mouse Wheel Down
Set1Stick1LeftSlots=Z,Arrow Left,B,DISTANCE ZONE 60%,Z,Arrow Left
Set1Stick2UpSlots=Mouse Move Up
Set1Stick2UpMouseSpeed=40
Set1Stick2RightSlots=Mouse Move Right
Set1Stick2RightMouseSpeed=40
Set1Stick2DownSlots=Mouse Move Down
Set1Stick2DownMouseSpeed=40
Set1Stick2LeftSlots=Mouse Move Left
Set1Stick2LeftMouseSpeed=40
Set1TriggerLeftName=Change Target
Set1TriggerLeftSlots=Q
Set1TriggerRightName=Change Target
Set1TriggerRightSlots=E
Is there anyway i can use all that, load it up so to speak or do i have to manually do all that myself?
Last edited by SGTCableDog on 25 Sep 2011, 05:52, edited 1 time in total.
Reason: Add code tag.

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: Help with Codes

Post by Primal Fear »


Post Reply

Return to “Other questions”