2012 version. Not sure if this a bug or a new one but here goes:
This also screws up Xpadder somehow, I can't save or exit for example.
I'm trying to make an axis generate single keypresses when the axis value increases and another single keytap when it decreases. In other words I'm trying to emulate a rotary encoder using a potentiometer.
If I use 0.01 pause after each keypress, the keytaps are not produced at all, except the first one. Using a hold zone causes the above behaviour. Any help appreciated!
FWIW, this is for my DCS A-10C cockpit project (Yaw trim function).
Code: Select all
Set1TriggerLeftSlots=HOLD ZONE 0.10s,1,DISTANCE ZONE 10%,HOLD ZONE 0.10s,2,DISTANCE ZONE 10%,HOLD ZONE 0.10s,3,DISTANCE ZONE 10%,HOLD ZONE 0.10s,4,DISTANCE ZONE 10%,HOLD ZONE 0.10s,5,DISTANCE ZONE 10%,HOLD ZONE 0.10s,6,DISTANCE ZONE 10%,HOLD ZONE 0.10s,7,DISTANCE ZONE 10%,HOLD ZONE 0.10s,8,DISTANCE ZONE 10%,HOLD ZONE 0.10s,9,DISTANCE ZONE 10%,HOLD ZONE 0.10s,0