Mass Effect 1 PC - 360 Rumble

Post Reply
sirurza
Posts: 5
Joined: 16 Feb 2012, 00:17

Mass Effect 1 PC - 360 Rumble

Post by sirurza »

So I'm playing Mass Effect 1 on the pc using xpadder to use the 360 controller. The rumble bugs out at times.. from a mild rumble and a full powered one for no reason. Sometimes going to the esc menu resets it, other times I have to alt tab out of Mass Effect. Any ideas why it bugs like this?

Mass Effect 1 has no controller support, so I'm thinking it's something from xpadder. Does xpadder have a setting for the rumble?

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: Mass Effect 1 PC - 360 Rumble

Post by Primal Fear »

Yes, check id any button in your profile has a yellow bar on the left and right side.

sirurza
Posts: 5
Joined: 16 Feb 2012, 00:17

Re: Mass Effect 1 PC - 360 Rumble

Post by sirurza »

Nope, no yellow.

sirurza
Posts: 5
Joined: 16 Feb 2012, 00:17

Re: Mass Effect 1 PC - 360 Rumble

Post by sirurza »

Here's my profile if it helps any.

Code: Select all

;--- Xpadder Profile Data ---
DataType=Profile
Version=2012.05.01
Name=Mass Effect 1
Set1StickDeadZones=64,52
Set2StickDeadZones=64,53
Set3StickDeadZones=64,52
Set3StickDiagonalSizes=45,40
Set4StickDeadZones=52,52
Set5StickDeadZones=52,52
Set6StickDeadZones=52,52
Set7StickDeadZones=52,52
Set8StickDeadZones=52,52
Set1Button1Slots=E
Set1Button2Slots=Q
Set1Button3Slots=F
Set1Button4Slots=Right Square Bracket
Set1Button5Slots=Space
Set1Button5Toggle=1
Set1Button6Toggle=1
Set1Button6SetSelect=1
Set1Button7Slots=M
Set1Button8Slots=Escape
Set1Button8Toggle=1
Set1Button8SetSelect=2
Set1Button9Slots=Left Shift
Set1Button10Slots=Left Control
Set1DPadUpSlots=1
Set1DPadRightSlots=3
Set1DPadDownSlots=4
Set1DPadLeftSlots=2
Set1Stick1UpSlots=W
Set1Stick1RightSlots=D
Set1Stick1DownSlots=S
Set1Stick1LeftSlots=A
Set1Stick2UpSlots=Mouse Move Up
Set1Stick2UpMouseSpeed=60
Set1Stick2RightSlots=Mouse Move Right
Set1Stick2RightMouseSpeed=60
Set1Stick2DownSlots=Mouse Move Down
Set1Stick2DownMouseSpeed=60
Set1Stick2LeftSlots=Mouse Move Left
Set1Stick2LeftMouseSpeed=60
Set1TriggerLeftSlots=Right Mouse Button (2)
Set1TriggerRightSlots=Left Mouse Button (1)
Set2Button2Slots=N
Set2Button4Slots=R
Set2Button5Slots=Space
Set2Button6Toggle=1
Set2Button6SetSelect=0
Set2Button7Slots=M
Set2Button8Slots=Escape
Set2Button8SetSelect=2
Set2Button9Slots=Left Shift
Set2Button10Slots=Left Control
Set2DPadUpSlots=5
Set2DPadRightSlots=7
Set2DPadDownSlots=8
Set2DPadLeftSlots=6
Set2Stick1UpSlots=Arrow Up
Set2Stick1RightSlots=Arrow Right
Set2Stick1DownSlots=Arrow Down
Set2Stick1LeftSlots=Arrow Left
Set2Stick2UpSlots=Mouse Move Up
Set2Stick2UpMouseSpeed=60
Set2Stick2RightSlots=Mouse Move Right
Set2Stick2RightMouseSpeed=60
Set2Stick2DownSlots=Mouse Move Down
Set2Stick2DownMouseSpeed=60
Set2Stick2LeftSlots=Mouse Move Left
Set2Stick2LeftMouseSpeed=60
Set2TriggerLeftSlots=Right Mouse Button (2)
Set2TriggerRightSlots=Left Mouse Button (1)
Set3Button1Slots=Left Mouse Button (1)
Set3Button2Slots=Q
Set3Button2SetSelect=0
Set3Button8Slots=Escape
Set3Button8Toggle=1
Set3Button8SetSelect=0
Set3DPadUpSlots=Arrow Up
Set3DPadRightSlots=Arrow Right
Set3DPadDownSlots=Arrow Down
Set3DPadLeftSlots=Arrow Left
Set3Stick1UpSlots=Arrow Up
Set3Stick1RightSlots=Arrow Right
Set3Stick1DownSlots=Arrow Down
Set3Stick1LeftSlots=Arrow Left
Set3Stick2UpSlots=Mouse Move Up
Set3Stick2UpMouseSpeed=32
Set3Stick2RightSlots=Mouse Move Right
Set3Stick2RightMouseSpeed=32
Set3Stick2DownSlots=Mouse Move Down
Set3Stick2DownMouseSpeed=32
Set3Stick2LeftSlots=Mouse Move Left
Set3Stick2LeftMouseSpeed=32
Set3TriggerRightSlots=Left Mouse Button (1)

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: Mass Effect 1 PC - 360 Rumble

Post by Primal Fear »

Have a look at this topic, Mass Effect may not have native controller support but there is this bug. However, the file that I have mentioned in this post will also block the rumble signal If it is coming from the game. Try it, installing it can definitely not hurt.

Post Reply

Return to “Other questions”