STICK AXIS
-
badga09
STICK AXIS
When xpadder tries to detect the stick axis and asks me to push left, up etc.. it doesn't work correctly. Up could be down, down could be right or none at all, can anyone help?
-
SGTCableDog
- Xpadder Xpert
- Posts: 1118
- Joined: 27 Aug 2009, 03:35
- Location: Minnesota, USA
- Contact:
Re: STICK AXIS
Click on the controller tab on the main Xpadder window, it is in the upper right corner, to open its Controller Properties. The Controller properties window show graphs of the raw data reported by Windows. You should have just DirectX graphs unless you have a Xbox360 controller, then you'll have an additional set of XInput graphs. When you move your sticks do the correct graphs move as you expect them to?
If you have the XInput graphs but your controller is not a 360 controller you must deselect the "Use Xinput if available" option in Xpadders settings. Access Xpadder settings by clicking the wrench icon in the upper right of the main Xpadder window.
If you have the XInput graphs but your controller is not a 360 controller you must deselect the "Use Xinput if available" option in Xpadders settings. Access Xpadder settings by clicking the wrench icon in the upper right of the main Xpadder window.