auto select a set

Post Reply
wronschien
Posts: 2
Joined: 16 Mar 2012, 11:05
Location: Montauban, France

auto select a set

Post by wronschien »

Hello,

Is it possible to auto select a set when a profile is loaded, not just the first one ?
Or maybe is there a way to reorder the sets ? I can't find any.

Thank you !

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: auto select a set

Post by Primal Fear »

Both is not possible directly in Xpadder, but you can rearrange the sets by pasting the profile into Notepad. Then you press Ctrl+H to open the replace function of Notepad.
First you have to make Set1 free, so you type in the first line Set1 and in the second one Set9 (or any other set that the profile is not using, but Set9 is absolutely sure as it doesn't exist anyways) and click on "Replace all". Now you can do the same with the set that should become Set1, this time of course with Set1 in the replace line.
That way you can move through all sets you want to swap until the former Set1 has a valid set number again. Copy&Paste the profile text back into Xpadder and bow you only have to verify/fix the set selectors.

wronschien
Posts: 2
Joined: 16 Mar 2012, 11:05
Location: Montauban, France

Re: auto select a set

Post by wronschien »

I'll try that thank you

Post Reply

Return to “Sets”