trigger release/hold

Post Reply
guest

trigger release/hold

Post by guest »

Is there a way to map the left trigger on a 360 controller to zoom in on the pull, and zoom out on release. Basically making it the opposite of a toggle. I want to be able to hold down left trigger and be zoomed in and let go and it zooms out.

Terra Branford
Xpadder Xpert
Posts: 312
Joined: 27 Aug 2009, 15:44
Contact:

Re: trigger release/hold

Post by Terra Branford »

You can do this with the latest versions of Xpadder.

By using a "Distance Zone", when you have pulled the Left Trigger beyond 75% (or any other distance), it will send the keyboard keypress required to enter into "Zoom" mode, and after releasing the trigger beyond 25%, it will send the keyboard keypress required to exit Zoom mode.

This will allow you to enter and exit Zoom mode freely at any time, by simply squeezing the Left Trigger a set distance. You can also use the "Hold Zone" (so that you have to HOLD the Left Trigger the entire time you want to be in Zoom, and the companion "Release Zone" so that you'll exit Zoom mode when you release).

Post Reply

Return to “More questions”