BioShock 2 (X360) - BleedingEdge profile by YoJembo

Share and discuss profiles

BioShock 2 (X360) - BleedingEdge profile by YoJembo

Post » 21 Mar 2010, 21:37

Select all the Profile text, copy, click the Paste option in Xpadder Profile Menu (help)

Finally, the wait is over. :P

Hate to be still? This is the profile for those on the go!

Here you don't have to stop moving to change ammo, weapons or plasmids.

Reload on the fly, bash in an instant, don't stop firing for a single second.

Don't get caught in a crouch when you're on the couch.... try YoJembo's BioShock 2 Profile today!


WARNING: May cause severe mutation.


Code: Select all
;--- Xpadder Profile Data ---
Version=2010.03.18
Name=BioShock2 Profile
Set1DPadMode=FourWay
Set2DPadMode=FourWay
Set8DPadMode=FourWay
Set1Button1Name=Jump
Set1Button1Slots=Space
Set1Button1Rumble=1
Set1Button1RumbleStrengths=255,255
Set1Button2Name=Next Ammo
Set1Button2Slots=Left Square Bracket
Set1Button2Rumble=1
Set1Button3Name=Use/ >
Set1Button3Slots=HOLD ZONE 0.50s,L,RELEASE ZONE 0.01s,F,RELEASE ZONE 0.50s
Set1Button4Name=Prev Ammo
Set1Button4Slots=Right Square Bracket
Set1Button4Rumble=1
Set1Button5Name=Zoom
Set1Button5Slots=T
Set1Button5Rumble=1
Set1Button6Name=Modifier
Set1Button6SetSelect=1
Set1Button7Slots=Escape
Set1Button8Name=Map/Menu
Set1Button8Slots=M
Set1Button8Toggle=1
Set1Button8Rumble=1
Set1Button8SetSelect=7
Set1Button9Rumble=1
Set1Button9RumbleStrengths=255,255
Set1Button10Name=Bash
Set1Button10Slots=Left Shift
Set1Button10Rumble=1
Set1Button10RumbleStrengths=255,255
Set1DPadUpName=TK Shield
Set1DPadUpSlots=Alt
Set1DPadUpToggle=1
Set1DPadRightName=Crouch
Set1DPadRightSlots=C
Set1DPadDownName=First Aid
Set1DPadDownSlots=Left Control
Set1DPadDownRumble=1
Set1DPadLeftName=Hack/Drop
Set1DPadLeftSlots=B
Set1DPadLeftRumble=1
Set1Stick1UpSlots=W
Set1Stick1RightSlots=D
Set1Stick1DownSlots=S
Set1Stick1LeftSlots=A
Set1Stick2UpSlots=Mouse Move Up
Set1Stick2UpMouseSpeed=51
Set1Stick2RightSlots=Mouse Move Right
Set1Stick2RightMouseSpeed=51
Set1Stick2DownSlots=Mouse Move Down
Set1Stick2DownMouseSpeed=51
Set1Stick2LeftSlots=Mouse Move Left
Set1Stick2LeftMouseSpeed=51
Set1TriggerLeftName=Plasmid
Set1TriggerLeftSlots=Right Mouse Button (2)
Set1TriggerLeftRumble=1
Set1TriggerLeftRumbleStrengths=255,255
Set1TriggerRightName=Weapon
Set1TriggerRightSlots=Left Mouse Button (1)
Set1TriggerRightRumble=1
Set1TriggerRightRumbleStrengths=255,255
Set2Button1Name=Next P
Set2Button1Slots=Q
Set2Button1Rumble=1
Set2Button2Name=Next W
Set2Button2Slots=Mouse Wheel Up
Set2Button2Rumble=1
Set2Button3Name=Prev P
Set2Button3Slots=Z
Set2Button3Rumble=1
Set2Button4Name=Prev W
Set2Button4Slots=Mouse Wheel Down
Set2Button4Rumble=1
Set2Button5Name=Zoom
Set2Button5Slots=T
Set2Button5Rumble=1
Set2Button6Name=Modifier
Set2Button6SetSelect=0
Set2Button7Slots=Escape
Set2Button8Name=Map/Menu
Set2Button8Slots=M
Set2Button8SetSelect=7
Set2Button9Rumble=1
Set2Button9RumbleStrengths=255,255
Set2Button10Name=Reload
Set2Button10Slots=R
Set2Button10Rumble=1
Set2Button10RumbleStrengths=255,255
Set2DPadUpName=Quick Save
Set2DPadUpSlots=F12
Set2DPadRightName=Exit Scout
Set2DPadRightSlots=J
Set2DPadDownName=Quick Load
Set2DPadDownSlots=F11
Set2DPadLeftName=Camera
Set2DPadLeftSlots=6
Set2Stick1UpSlots=W
Set2Stick1RightSlots=D
Set2Stick1DownSlots=S
Set2Stick1LeftSlots=A
Set2Stick2UpSlots=Mouse Move Up
Set2Stick2UpMouseSpeed=51
Set2Stick2RightSlots=Mouse Move Right
Set2Stick2RightMouseSpeed=51
Set2Stick2DownSlots=Mouse Move Down
Set2Stick2DownMouseSpeed=51
Set2Stick2LeftSlots=Mouse Move Left
Set2Stick2LeftMouseSpeed=51
Set2TriggerLeftName=Plasmid
Set2TriggerLeftSlots=Right Mouse Button (2)
Set2TriggerLeftRumble=1
Set2TriggerLeftRumbleStrengths=255,255
Set2TriggerRightName=Weapon
Set2TriggerRightSlots=Left Mouse Button (1)
Set2TriggerRightRumble=1
Set2TriggerRightRumbleStrengths=255,255
Set8Button1Name=Down Menu
Set8Button1Slots=Mouse Wheel Down
Set8Button2Name=Back
Set8Button2Slots=Escape
Set8Button3Name=Zoom Map
Set8Button3Slots=X
Set8Button4Name=Up Menu
Set8Button4Slots=Mouse Wheel Up
Set8Button7Name=Back
Set8Button7Slots=Escape
Set8Button8Name=Cont
Set8Button8Slots=Escape
Set8Button8Toggle=1
Set8Button8SetSelect=0
Set8DPadUpSlots=W
Set8DPadRightSlots=D
Set8DPadDownSlots=S
Set8DPadLeftSlots=A
Set8Stick1UpSlots=Mouse Move Up
Set8Stick1UpMouseSpeed=32
Set8Stick1RightSlots=Mouse Move Right
Set8Stick1RightMouseSpeed=32
Set8Stick1DownSlots=Mouse Move Down
Set8Stick1DownMouseSpeed=32
Set8Stick1LeftSlots=Mouse Move Left
Set8Stick1LeftMouseSpeed=32
Set8Stick2UpSlots=Mouse Move Up
Set8Stick2UpMouseSpeed=32
Set8Stick2RightSlots=Mouse Move Right
Set8Stick2RightMouseSpeed=32
Set8Stick2DownSlots=Mouse Move Down
Set8Stick2DownMouseSpeed=32
Set8Stick2LeftSlots=Mouse Move Left
Set8Stick2LeftMouseSpeed=32
Set8TriggerLeftName=Select
Set8TriggerLeftSlots=Left Mouse Button (1)
Set8TriggerRightName=Select
Set8TriggerRightSlots=Left Mouse Button (1)


IMPORTANT NOTES:
  • Modifier is right shoulder button (RB).
  • Tap X = Use;
  • Hold X = Play Last Tape Recording.
  • {Only for this profile} Camera (Set 2) is set to key 6. You might need to change it if you'd picked up your weapons in a different order.
  • You'll have to experiment with the Menu controls (Set 8) to get the hang of them.
  • If you find you are in the Menu controls ingame, quickly tap Start then Back. Don't Panic!
  • Play the game on HARD {ya Objectivist punk!}.
Later I will expound a more detailed rational behind this Profile's "philosophy". Stay tuned to this station.

"I'm of to bed now... Ta Ta!"
Last edited by YoJembo on 26 Apr 2010, 17:29, edited 9 times in total.
User avatar
YoJembo
Xpadder Xpert
Posts: 180
Joined: 08 Mar 2010, 15:55
Location: South Australia

*BioShock 2* - BleedingEdge profile ontology

Post » 26 Mar 2010, 21:46

Skip to the last bit you feel like it...

The key concept behind this profile is alacrity. I can't stand gamepad layouts that won't let me change weapons, and a whole bunch of other stuff, on the fly. So I tried to define actions based on levels of urgency factoring in convenience, simplicity, emerging gameplay and safety {actions that might catch you out}. Greatest urgency... both sticks employed. Medium... Left Stick needed. Lowest... Right Stick maybe, left thumb free. If you try this Profile you will see {feel} what I mean. Also, with simplicity in mind there a standard and a more complex version. Note that crouch is on the DPad Right (Set1), close enough for either thumb but far enough away to avoid hitting the bugger accidentally. Telekinesis Shield is set to toggle now to allow more freedom. And presetable weapon/plasmid combos are available in MarkII so you can get the most out of your quick camera work.

Have a good look at the Profile before using it, trying out the buttons. Note the Modifier button (RB) that gets you Set 2. Try the Start button that shows the Menu controls, tapping it again will take you back to Set 1. Read the IMPORTANT NOTES above. By all means tweak away at this Profile but bear in mind I put a lot of thought into it, as many do here, so give it a fair go.

This BleedingEdge setup is not available on any of the console versions...it is only made possible by the long hard work of Jonathan who created the superlative Xpadder in the first place. So if you haven't joined up for this bargain app. seriously consider it please... and make it worthwhile for this maverick to continue to evolve it {and controller-based PC gaming which we love} into the future.

Cheers & Good Gaming. :D
User avatar
YoJembo
Xpadder Xpert
Posts: 180
Joined: 08 Mar 2010, 15:55
Location: South Australia

Re: *BioShock 2* - BleedingEdge profile by YoJembo (X360)

Post » 27 Mar 2010, 09:27

I get a range check error when I try to paste your profile.
User avatar
gorkypah
Posts: 21
Joined: 27 Mar 2010, 08:08

Re: *BioShock 2* - BleedingEdge profile by YoJembo (X360)

Post » 27 Mar 2010, 11:03

gorkypah wrote:I get a range check error when I try to paste your profile.


It seems that v5.7 and earlier cannot handle the new profiles (probably because it reads the version number as v2010 which just blows its mind!)
Upgrade to the latest version here
User avatar
Jonathan
Xpadder creator
Posts: 1590
Joined: 24 Aug 2009, 11:33
Location: England

Re: *BioShock 2* - BleedingEdge profile by YoJembo (X360)

Post » 27 Mar 2010, 11:28

It seems that v5.7 and earlier cannot handle the new profiles (probably because it reads the version number as v2010 which just blows its mind!)
Upgrade to the latest version here


It works now, thanks.
User avatar
gorkypah
Posts: 21
Joined: 27 Mar 2010, 08:08

Re: *BioShock 2* - BleedingEdge profile by YoJembo (X360)

Post » 27 Mar 2010, 13:58

First thoughts after trying this profile... its really solid. All the buttons seem to be perfectly placed. My only complaint is the overuse of rumble. I would prefer only having rumble for certain things like using the drill, plasmid, or jumping. IMO rumble for things like zoom, first aid, and switching weapons is a little overkill.
User avatar
gorkypah
Posts: 21
Joined: 27 Mar 2010, 08:08

Re: *BioShock 2* - BleedingEdge profile by YoJembo (X360)

Post » 27 Mar 2010, 14:57

gorkypah wrote:First thoughts after trying this profile... its really solid. All the buttons seem to be perfectly placed. My only complaint is the overuse of rumble. I would prefer only having rumble for certain things like using the drill, plasmid, or jumping. IMO rumble for things like zoom, first aid, and switching weapons is a little overkill.


Thanks for commenting.

My thinking is you're a lumbering heavy Big Daddy, so you really feel what you do... most of those presses are meant to be mere taps, most button holds are only 0.2secs, so there is only supposed to be a hint of rumble 90% of the time anyway... a little bit of feedback from your actions to help immerse you in the game world. That's the way it plays in the game for me.

Perhaps try it with the rumble settings turned down rather than off {advanced window}.

Hmm, I should have put something about it in the ontology bit above.

Regards.
User avatar
YoJembo
Xpadder Xpert
Posts: 180
Joined: 08 Mar 2010, 15:55
Location: South Australia

Re: *BioShock 2* - BleedingEdge profile by YoJembo (X360)

Post » 01 Aug 2010, 01:27

I have not been able to to paste a profile, I don't know what i am doing wrong!
User avatar
langman21
Posts: 4
Joined: 01 Aug 2010, 00:44

Re: *BioShock 2* - BleedingEdge profile by YoJembo (X360)

Post » 01 Aug 2010, 03:30

langman21 wrote:I have not been able to to paste a profile, I don't know what i am doing wrong!


You need to make sure your controller layout is correct. If you are using the Xbox 360 controller, make sure all your buttons are assigned in your layout. That means triggers, bumpers, and all the buttons need to be assigned.

Image
Image
If you paste this profile without assigning all the buttons you could have problems. Also make sure your Xpadder is up to date.
User avatar
gorkypah
Posts: 21
Joined: 27 Mar 2010, 08:08

Re: *BioShock 2* - BleedingEdge profile by YoJembo (X360)

Post » 01 Aug 2010, 14:46

I got my screen to look just like your photo. Then when past it just all falls off the screen, it goes blank.
User avatar
langman21
Posts: 4
Joined: 01 Aug 2010, 00:44

Re: *BioShock 2* - BleedingEdge profile by YoJembo (X360)

Post » 01 Aug 2010, 14:48

I figured it out I was pasteing on the wrong side, thanks for the help.
User avatar
langman21
Posts: 4
Joined: 01 Aug 2010, 00:44

Re: *BioShock 2* - BleedingEdge profile by YoJembo (X360)

Post » 21 Feb 2011, 00:17

Is this a custom profile, or just one that follows the button layout of the X-Box 360 controller for the original game? I am new here (just joined today), and played the original Bioshock, so that button layout is the one I prefer. If this is a custom profile which does not follow that layout, is there a profile that does? I have tried to create one myself, but haven't quite figured out how to assign dual functions to buttons.
User avatar
KnyteOwl
Posts: 4
Joined: 21 Feb 2011, 00:06

Re: *BioShock 2* - BleedingEdge profile by YoJembo (X360)

Post » 21 Feb 2011, 00:26

It is custom.
This one should be perfect for you.
User avatar
Primal Fear
Xpadder Xpert + Moderator
Posts: 2438
Joined: 09 Feb 2010, 16:41
Location: Germany

Re: *BioShock 2* - BleedingEdge profile by YoJembo (X360)

Post » 21 Feb 2011, 02:04

@gorkypah It's more useful to direct someone to the relevant help pages.
User avatar
YoJembo
Xpadder Xpert
Posts: 180
Joined: 08 Mar 2010, 15:55
Location: South Australia


Return to Game Profiles

Who is online

Users browsing this forum: No registered users and 1 guest

cron