Risen (X360)

Share and discuss profiles
Post Reply
Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Risen (X360)

Post by Primal Fear »

If a Gamepad Buttons has two names separated by a /, then it means that the first one is assigned for tap and the second one for hold.
Tap X for Use, hold it to put your weapon away before using (you cannot use :roll: while holding a weapon).
For "Zoom in" and "Zoom out" hold the right stick button and move it forward or backward.
Also while holding the right stick button, tap the right shoulder button for "quick save" and hold the left shoulder button (for at least for 0.7 seconds) for "quick load".
Image

[Important]
To have the assignment "Sneak" working, you need to change the key binding for it to X in the game under Settings->Input (Also, you cannot sneak at the beginning of the game as you have to learn it first)
[Important]

Code: Select all

;--- Xpadder Profile Data ---
DataType=Profile
Version=2011.07.25
Name=Risen (X360)
KeyTapTime=1
Set1TriggerDeadZones=5,5
Set1DPadMode=FourWay
Set2StickDeadZones=156,64
Set2TriggerDeadZones=5,5
Set2DPadMode=FourWay
Set2Stick1Mode=FourWay
Set2Stick2Mode=FourWay
Set3TriggerDeadZones=5,5
Set4TriggerDeadZones=5,5
Set5TriggerDeadZones=5,5
Set6TriggerDeadZones=5,5
Set7TriggerDeadZones=5,5
Set8TriggerDeadZones=5,5
Set1Button1Name=Jump
Set1Button1Slots=Space
Set1Button2Name=Inventory/Equip
Set1Button2Slots=RELEASE ZONE 0.01s,I,RELEASE ZONE 0.30s,HOLD ZONE 0.30s,C
Set1Button3Name=Use/Use w Wpn
Set1Button3Slots=RELEASE ZONE 0.01s,Left Mouse Button (1),RELEASE ZONE 0.30s,HOLD ZONE 0.30s,Middle Mouse Button (3),HOLD ZONE 0.05s,HOLD ZONE 0.65s,Left Mouse Button (1),HOLD ZONE 0.05s
Set1Button4Name=Map/Log
Set1Button4Slots=RELEASE ZONE 0.01s,M,RELEASE ZONE 0.20s,HOLD ZONE 0.20s,L
Set1Button5Name=Range Weapon
Set1Button5Slots=2
Set1Button6Name=Melee Weapon
Set1Button6Slots=1
Set1Button7Name=Quicklaunchbar
Set1Button7Slots=B
Set1Button8Name=Pause
Set1Button8Slots=Escape
Set1Button9Name=Sneak
Set1Button9Slots=X
Set1Button9Toggle=1
Set1Button10Name=Zoom...
Set1Button10SetSelect=1
Set1DPadUpName=quick 5/6
Set1DPadUpSlots=RELEASE ZONE 0.01s,5,RELEASE ZONE 0.20s,HOLD ZONE 0.20s,6
Set1DPadRightName=quick 7/8
Set1DPadRightSlots=RELEASE ZONE 0.01s,7,RELEASE ZONE 0.20s,HOLD ZONE 0.20s,8
Set1DPadDownName=quick 9/0
Set1DPadDownSlots=RELEASE ZONE 0.01s,9,RELEASE ZONE 0.20s,HOLD ZONE 0.20s,0
Set1DPadLeftName=quick 3/4
Set1DPadLeftSlots=RELEASE ZONE 0.01s,3,RELEASE ZONE 0.20s,HOLD ZONE 0.20s,4
Set1Stick1UpName=move
Set1Stick1UpSlots=Left Shift,W,DISTANCE ZONE 40%,W
Set1Stick1RightName=move
Set1Stick1RightSlots=Left Shift,D,DISTANCE ZONE 40%,D
Set1Stick1DownName=move
Set1Stick1DownSlots=Left Shift,S,DISTANCE ZONE 40%,S
Set1Stick1LeftName=move
Set1Stick1LeftSlots=Left Shift,A,DISTANCE ZONE 40%,A
Set1Stick2UpName=look
Set1Stick2UpSlots=Mouse Move Up
Set1Stick2UpMouseSpeed=45
Set1Stick2RightName=look
Set1Stick2RightSlots=Mouse Move Right
Set1Stick2RightMouseSpeed=45
Set1Stick2DownName=look
Set1Stick2DownSlots=Mouse Move Down
Set1Stick2DownMouseSpeed=45
Set1Stick2LeftName=look
Set1Stick2LeftSlots=Mouse Move Left
Set1Stick2LeftMouseSpeed=45
Set1TriggerLeftName=Block
Set1TriggerLeftSlots=Right Mouse Button (2)
Set1TriggerRightName=Hit
Set1TriggerRightSlots=Left Mouse Button (1)
Set2Button5Name=quickload on hold
Set2Button5Slots=HOLD ZONE 0.70s,F9
Set2Button6Name=quicksave on tap
Set2Button6Slots=RELEASE ZONE 0.01s,F8,RELEASE ZONE 0.30s
Set2Button10SetSelect=0
Set2Stick2UpName=zoom in
Set2Stick2UpSlots=Mouse Wheel Up
Set2Stick2DownName=zoom out
Set2Stick2DownSlots=Mouse Wheel Down
If you should have any problems with this profile, feel free to ask.

Update@26.11.11: Inventory/Equipment now on B, Sneak on LSB, X for Use
Last edited by Primal Fear on 26 Nov 2011, 01:13, edited 9 times in total.

60dcc9a8
Posts: 1
Joined: 09 Nov 2009, 06:37

Re: Risen (X360)

Post by 60dcc9a8 »

Thank you very much.
I can finally play this game.

Good work.

mumm11
Posts: 1
Joined: 30 Mar 2015, 13:45

Re: Risen (X360)

Post by mumm11 »

Hi,

this is myfirst effort with xpadder. From the Profile Just the Movement buttons work. the others dont. Also I cannot paste and copy the image in profile settings
Please help!

mumm11

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: Risen (X360)

Post by Primal Fear »

[url=http://xpadder.com/forum4/viewtopic.php?f=7&t=3709]Create your controller layout[/ulr] before Copy&Pasting a profile.

About
mumm11 wrote:Also I cannot paste and copy the image in profile settings
you need to specify further, as the only thing you actually can do in the profile settings is to specify the key press time.
Do you have problems with copy&pasting the controller image when creating your controller layout, or do you try to do something with my screenshot of my profile? In the latter case, you don't need to do that, it's just a preview. When copy&pasting the profile, it should look the same for you (minus the background image) if you did create your controller layout before.

Post Reply

Return to “Game Profiles”