Pioneer Space Simulation (Logitech 3D Pro Joystick)

Share and discuss profiles
Post Reply
baobobafet
Posts: 12
Joined: 15 Aug 2012, 02:12
Contact:

Pioneer Space Simulation (Logitech 3D Pro Joystick)

Post by baobobafet »

Pioneer Space Sim

Pioneer Space Sim (Logitech Extreme 3D Pro Joystick)


Genre: Space Simulation Game
- Pioneer is a FREE open-source remake of Frontier: Elite 2.
Featuring realistic space flight physics, planetary scales, gravities, atmospheres,
trading, mining and combat.
Procedurally generated surface terrain on asteroids, moons and planets amongst a vast
universe of star systems create unparalleled opportunities for exploration and trade.

Publisher: http://pioneerspacesim.net/
Developer: Pioneer Dev Team
Release Date: Under Development (Alpha versions released monthly)
Game Review:
http://freegamer.blogspot.ca/2011/01/oh ... e-and.html
http://alternativeto.net/software/pione ... -sim/about
http://spacesimcentral.com/forum/forum/23-pioneer/

Image

Updated for Pioneer Alpha 27-28 and up new key layout.
Version 5.0 of my custom printable Pioneer key template for Logitech's 3D Pro
(neutral backround color version in archive link at the bottom of posting)

A link to my logitech 3DPro controller layout file if you don't have one already made:
https://www.box.com/s/c9b993b34fe7fd50c336
-OR- get it all in one file with templates and all from the link down below

Pioneer supports simultaneous use of multiple mouse/keyboard and Analog flight controls.
Note: This Joystick profile is meant to be use in addition to existing keyboard and mouse
inputs, and is in not meant as a replacement.


This profile was created to take advantage of the three flight control modes supported
by Pioneer (Keyboard, Mouse & Analog Joystick). Xpadder will enable or emulate either
of these modes via the programed joystick Emulation Mode Button - allowing the user
the ability to toggle between each mode freely durring gameplay ie:

Joystick WASD flight control
Joystick Mouse Emulation flight control
Joystick Analog flight control


User Instructions: Please read first.

If either of the 3 modes are activated or exited from improperly
- the profile may fail to work correctly.

This profile is a work in progress. Also due to Pioneer's Alpha state some game keys
may change in later versions.
This profile was designed and tested for Pioneer Spacesim Alpha25.
Unless a major interface rewrite occurs, this profile should remain valid for current
release versions of Pioneer.

As part of my own control suite I have customised my mouse settings using X-Mouse,
so this profile does not include any Xpadder mouse settings support.
(as a ref there is a pic with my extra mouse functions to customize your own)
Text/Images: Show
Image
Trackman only Pic

Version 5.0 no longer includes the G13 profile (you will have to download that component from the 3.0 version.)
Text/Images: Show
Image
Trackman key layout and a basic Pioneer Logitech G13 template
(included in pioneerCTRL.zip) Logitech G13 Key Profile & Trackman res797x1024.png



Extreme 3D Pro Control Modes:
The 3 joystick control modes can be changed in game using the Emulation Mode switch.

DEFAULT MODE -
Mouse emulation or Keyboard Joystick (joystick must be OFF in game menu)
In default mode you can easily toggle between mouse and keyboard emulation mode by
simply a press of the Emulation Mode button.


SECOND MODE -
Mouse emulation or Analog Joystick (joystick must be ON in game menu)
Once you enable the analog mode (hold in joystick trigger then press the Emulation Mode
button) you can now easily toggle between mouse emulation and Analog mode by simply
pressing the Emulation Mode button while the trigger is depressed.



-----------------------------
IMPORTANT Whenever entering or exiting analog mode the game config screen will appear.
Enabling analog mode: (Joystick option should be disabled by default and only enabled for
that period when analog function is desired durring flight -
Otherwise it should remain DISABLED - or other joystick modes will fail to work properly)
-----------------
For analog stick function to work you must have the Joystick option in pioneer's controls
config screen enabled and the pitch roll and yaw readings should look like this:

Pitch -JoyO Y Axis
Roll JoyO X Axis
Yaw JoyO 3 Axis

(if not move the stick around until you get the same axis assignments)
Each time the analog mode is enabled - you should confirm these axis have not changed.


Disabling Analog mode and re-enabling default control mode 1
-ie: Joystick ASWD mode emulating keypresses.
Simply press the Emulation Mode button (without depressing the trigger) Then make sure
to disable the analog joystick option in Pioneer's controls screen.

These screens are from the 3.0 version but will give you 'some' idea of the layout - without the new key changes.
Text/Images: Show
Image
Xpadder screens with labels on keys.
Text/Images: Show
Image
Xpadder screens with characters on keys.

Profile for Pioneer Space Sim


Not Compatibility with Oke_Doke's Profile Converter

v5.0

Code: Select all

;--- Xpadder Profile File ---
DataType=Profile
Version=2012.12.31

[Profile Settings]

[Set Settings]
Set1StickDeadZones=64,146
Set1StickDiagonalSizes=45,1
Set1TriggerDeadZones=213,213
Set2StickDeadZones=64,146
Set2StickDiagonalSizes=45,1
Set2TriggerDeadZones=174,174
Set3StickDeadZones=66,146
Set3StickDiagonalSizes=45,1
Set3TriggerDeadZones=212,214
Set4StickDeadZones=64,148
Set4StickDiagonalSizes=45,1
Set4TriggerDeadZones=174,174
Set5StickDeadZones=64,148
Set5StickDiagonalSizes=45,1
Set5TriggerDeadZones=213,211
Set6StickDeadZones=64,146
Set6StickDiagonalSizes=45,1
Set6TriggerDeadZones=172,174

[Assignments]
Set1Button1Name=Red/Blue Mode
Set1Button1SetSelect=1
Set1Button2Name=+-Reset Dist2 Ship
Set1Button2Slots=NumPad +,CYCLE STOP,NumPad -,CYCLE STOP,Home,CYCLE STOP
Set1Button3Name=Top view & Left Sidereal Pan
Set1Button3Slots=NumPad 1
Set1Button4Name=Bottom view & Right Sidereal Pan
Set1Button4Slots=NumPad 3
Set1Button5Name=Labels On/Off
Set1Button5Slots=Tab
Set1Button6Name=Cycle View
Set1Button6Slots=F1
Set1Button7Name=Auto/Man
Set1Button7Slots=F5
Set1Button8Name=Ship Info
Set1Button8Slots=F3
Set1Button9Name=Comms
Set1Button9Slots=F4
Set1Button10Name=Emulation Mode
Set1Button10Toggle=1
Set1Button10SetSelect=4
Set1Button11Name=Star/System Maps
Set1Button11Slots=F2
Set1Button12Name=Gear Up/Dn
Set1Button12Slots=F6
Set1DPadUpName=View Dn
Set1DPadUpSlots=NumPad 8
Set1DPadRightName=View Right
Set1DPadRightSlots=NumPad 6
Set1DPadDownName=View Up
Set1DPadDownSlots=NumPad 2
Set1DPadLeftName=View Left
Set1DPadLeftSlots=NumPad 4
Set1Stick1UpName=Pitch Dn
Set1Stick1UpSlots=W
Set1Stick1RightName=R Roll
Set1Stick1RightSlots=E
Set1Stick1DownName=Pitch Up
Set1Stick1DownSlots=S
Set1Stick1LeftName=L Roll
Set1Stick1LeftSlots=Q
Set1Stick2RightName=R Yaw
Set1Stick2RightSlots=D
Set1Stick2LeftName=L Yaw
Set1Stick2LeftSlots=A
Set1TriggerLeftName=Scanner +
Set1TriggerLeftSlots=Left Square Bracket
Set1TriggerLeftTurboRate=25
Set1TriggerRightName=Scanner -
Set1TriggerRightSlots=Right Square Bracket
Set1TriggerRightTurboRate=25
Set2Button1Name=Red/Blue Mode
Set2Button1SetSelect=0
Set2Button2Name=Fire & LMB
Set2Button2Slots=Left Mouse Button (1),Space
Set2Button3Name=Thrust Up
Set2Button3Slots=U
Set2Button4Name=Thrust Down
Set2Button4Slots=O
Set2Button5Name=Target Select
Set2Button5Slots=T
Set2Button6Name=Scanner Modes
Set2Button6Slots=Back-Slash[UK] (US use #),Back-Slash[US]/Hash[UK]
Set2Button7Name=Auto/Man
Set2Button7Slots=F5
Set2Button8Name=Ship Info
Set2Button8Slots=F3
Set2Button9Name=Comms
Set2Button9Slots=F4
Set2Button10Name=Emulation Mode
Set2Button10Slots=Escape
Set2Button10SetSelect=3
Set2Button11Name=Star/System Map
Set2Button11Slots=F2
Set2Button12Name=Gear Up/Dn
Set2Button12Slots=F6
Set2DPadUpName=Thrust Forward
Set2DPadUpSlots=I
Set2DPadRightName=R Thrust
Set2DPadRightSlots=L
Set2DPadDownName=Thrust Reverse
Set2DPadDownSlots=K
Set2DPadLeftName=L Thrust
Set2DPadLeftSlots=J
Set2Stick1UpName=Pitch Dn
Set2Stick1UpSlots=W
Set2Stick1UpTurboRate=25
Set2Stick1RightName=R Roll
Set2Stick1RightSlots=E
Set2Stick1RightTurboRate=25
Set2Stick1DownName=Pitch Up
Set2Stick1DownSlots=S
Set2Stick1DownTurboRate=25
Set2Stick1LeftName=L Roll
Set2Stick1LeftSlots=Q
Set2Stick1LeftTurboRate=25
Set2Stick2RightName=R Yaw
Set2Stick2RightSlots=D
Set2Stick2RightTurboRate=25
Set2Stick2LeftName=L Yaw
Set2Stick2LeftSlots=A
Set2Stick2LeftTurboRate=25
Set2TriggerLeftName=Scanner +
Set2TriggerLeftSlots=Left Square Bracket
Set2TriggerLeftTurboRate=25
Set2TriggerRightName=Scanner -
Set2TriggerRightSlots=Right Square Bracket
Set2TriggerRightTurboRate=25
Set3Button1Name=Red/Blue Mode
Set3Button1SetSelect=3
Set3Button2Name=+-Reset Dist2 Ship
Set3Button2Slots=NumPad +,CYCLE STOP,NumPad -,CYCLE STOP,Home,CYCLE STOP
Set3Button3Name=Top view & Left Sidereal Pan
Set3Button3Slots=NumPad 1
Set3Button4Name=Bottom view & Right Sidereal Pan
Set3Button4Slots=NumPad 3
Set3Button5Name=Labels On/Off
Set3Button5Slots=Tab
Set3Button6Name=Cycle View
Set3Button6Slots=F1
Set3Button7Name=Auto/Man
Set3Button7Slots=F5
Set3Button8Name=Ship Info
Set3Button8Slots=F3
Set3Button9Name=Comms
Set3Button9Slots=F4
Set3Button10Name=Emulation Mode
Set3Button10Slots=Escape
Set3Button10SetSelect=0
Set3Button11Name=Star/System Map
Set3Button11Slots=F2
Set3Button12Name=Gear Up/Dn
Set3Button12Slots=F6
Set3DPadUpName=View Dn
Set3DPadUpSlots=NumPad 8
Set3DPadRightName=View Right
Set3DPadRightSlots=NumPad 6
Set3DPadDownName=View Up
Set3DPadDownSlots=NumPad 2
Set3DPadLeftName=View Left
Set3DPadLeftSlots=NumPad 4
Set3Stick1RightName=A
Set3Stick1DownName=O
Set3Stick1LeftName=A
Set3Stick2UpName=N
Set3Stick2RightName=G
Set3Stick2LeftName=L
Set3TriggerLeftName=Scanner +
Set3TriggerLeftSlots=Left Square Bracket
Set3TriggerLeftTurboRate=25
Set3TriggerRightName=Scanner -
Set3TriggerRightSlots=Right Square Bracket
Set3TriggerRightTurboRate=25
Set4Button1Name=Red/Blue Mode
Set4Button1SetSelect=2
Set4Button2Name=Fire & LMB
Set4Button2Slots=Left Mouse Button (1),Space
Set4Button3Name=Thrust Up
Set4Button3Slots=U
Set4Button4Name=Thrust Down
Set4Button4Slots=O
Set4Button5Name=Target Select
Set4Button5Slots=T
Set4Button6Name=Scanner Mode
Set4Button6Slots=Back-Slash[UK] (US use #),Back-Slash[US]/Hash[UK]
Set4Button7Name=Auto/Man
Set4Button7Slots=F5
Set4Button8Name=Ship Info
Set4Button8Slots=F3
Set4Button9Name=Comms
Set4Button9Slots=F4
Set4Button10Name=Emulation Mode
Set4Button10Toggle=1
Set4Button10SetSelect=5
Set4Button11Name=Star/System Map
Set4Button11Slots=F2
Set4Button12Name=Gear Up/Dn
Set4Button12Slots=F6
Set4DPadUpName=Thrust Forward
Set4DPadUpSlots=I
Set4DPadRightName=R Thrust
Set4DPadRightSlots=L
Set4DPadDownName=Thrust Reverse
Set4DPadDownSlots=K
Set4DPadLeftName=L Thrust
Set4DPadLeftSlots=J
Set4Stick1UpTurboRate=25
Set4Stick1RightName=A
Set4Stick1RightTurboRate=25
Set4Stick1DownName=O
Set4Stick1DownTurboRate=25
Set4Stick1LeftName=A
Set4Stick1LeftTurboRate=25
Set4Stick2UpName=N
Set4Stick2RightName=G
Set4Stick2RightTurboRate=25
Set4Stick2LeftName=L
Set4Stick2LeftTurboRate=25
Set4TriggerLeftName=Scanner +
Set4TriggerLeftSlots=Left Square Bracket
Set4TriggerLeftTurboRate=25
Set4TriggerRightName=Scanner -
Set4TriggerRightSlots=Right Square Bracket
Set4TriggerRightTurboRate=25
Set5Button1Name=Red/Blue & RMB
Set5Button1Slots=Right Mouse Button (2)
Set5Button1SetSelect=5
Set5Button2Name=+-Reset Dist2 Ship
Set5Button2Slots=NumPad +,CYCLE STOP,NumPad -,CYCLE STOP,Home,CYCLE STOP
Set5Button3Name=Top view & Left Sidereal Pan
Set5Button3Slots=NumPad 1
Set5Button4Name=Bottom view & Right Sidereal Pan
Set5Button4Slots=NumPad 3
Set5Button5Name=Labels On/Off
Set5Button5Slots=Tab
Set5Button6Name=Cycle View
Set5Button6Slots=F1
Set5Button7Name=Auto/Man
Set5Button7Slots=F5
Set5Button8Name=Ship Info
Set5Button8Slots=F3
Set5Button9Name=Comms
Set5Button9Slots=F4
Set5Button10Name=Emulation Mode
Set5Button10Toggle=1
Set5Button10SetSelect=0
Set5Button11Name=Star/System Map
Set5Button11Slots=F2
Set5Button12Name=Gear Up/Dn
Set5Button12Slots=F6
Set5DPadUpName=View Dn
Set5DPadUpSlots=NumPad 8
Set5DPadRightName=View R
Set5DPadRightSlots=NumPad 6
Set5DPadDownName=View Up
Set5DPadDownSlots=NumPad 2
Set5DPadLeftName=View L
Set5DPadLeftSlots=NumPad 4
Set5Stick1UpSlots=Mouse Move Down
Set5Stick1UpMouseSpeed=32
Set5Stick1RightSlots=Mouse Move Right
Set5Stick1RightMouseSpeed=32
Set5Stick1DownSlots=Mouse Move Up
Set5Stick1DownMouseSpeed=32
Set5Stick1LeftSlots=Mouse Move Left
Set5Stick1LeftMouseSpeed=32
Set5Stick2RightName=R Yaw
Set5Stick2RightSlots=E
Set5Stick2LeftName=L Yaw
Set5Stick2LeftSlots=Q
Set5TriggerLeftName=Scanner +
Set5TriggerLeftSlots=Left Square Bracket
Set5TriggerRightName=Scanner -
Set5TriggerRightSlots=Right Square Bracket
Set5TriggerRightTurboRate=25
Set6Button1Name=Red/Blue & RMB
Set6Button1Slots=Right Mouse Button (2)
Set6Button1SetSelect=4
Set6Button2Name=Fire & LMB
Set6Button2Slots=Left Mouse Button (1),Space
Set6Button3Name=Thrust Up
Set6Button3Slots=U
Set6Button4Name=Thrust Down
Set6Button4Slots=O
Set6Button5Name=Target Select
Set6Button5Slots=T
Set6Button6Name=Scanner Mode
Set6Button6Slots=Back-Slash[UK] (US use #),Back-Slash[US]/Hash[UK]
Set6Button7Name=Auto/Man
Set6Button7Slots=F5
Set6Button8Name=Ship Info
Set6Button8Slots=F3
Set6Button9Name=Comms
Set6Button9Slots=F4
Set6Button10Name=Emulation Mode
Set6Button10Toggle=1
Set6Button10SetSelect=3
Set6Button11Name=Star/System Map
Set6Button11Slots=F2
Set6Button12Name=Gear Up/Dn
Set6Button12Slots=F6
Set6DPadUpName=Thrust Forward
Set6DPadUpSlots=I
Set6DPadRightName=R Thrust
Set6DPadRightSlots=L
Set6DPadDownName=Thrust Reverse
Set6DPadDownSlots=K
Set6DPadLeftName=L Thrust
Set6DPadLeftSlots=J
Set6Stick1UpSlots=Mouse Move Down
Set6Stick1UpMouseSpeed=32
Set6Stick1RightSlots=Mouse Move Right
Set6Stick1RightMouseSpeed=32
Set6Stick1DownSlots=Mouse Move Up
Set6Stick1DownMouseSpeed=32
Set6Stick1LeftSlots=Mouse Move Left
Set6Stick1LeftMouseSpeed=32
Set6Stick2RightName=R Yaw
Set6Stick2RightSlots=E
Set6Stick2LeftName=L Yaw
Set6Stick2LeftSlots=Q
Set6TriggerLeftName=Scanner +
Set6TriggerLeftSlots=Left Square Bracket
Set6TriggerLeftTurboRate=26
Set6TriggerRightName=Scanner -
Set6TriggerRightSlots=Right Square Bracket
Set6TriggerRightTurboRate=25


-----------------------------------------------------------------
Joystick Drift and Centering:
(critical for proper analog joystick performance)
Be sure to have your joystick well calibrated to eliminate ALL drift issues.
If Joystick drift persists, you can edit Pioneer's "analog" joystick deadzone via
editing Pioneer's config file (in C:\Users\xxxx\Documents\Pioneer\config.ini with
Notepad++ Try changing the Joystick setting to: JoystickDeadzone=0.3
(This setting varies from user to user depending on age & wear on the joystick)
Increasing this number increases the size of the deadzone.
Failing all the above, means it's time for a new joystick.

------------------- Quick Run Through--------------------------

To enter Analog mode - Make sure you are in keyboard emulation mode(default) hold in
the trigger - then hit the Emulation Mode button.The game config screen will pop up to
prompt you to enable the joystick option in game. once enabled you must confirm the
axis settings are correct: Pitch -JoyO Y Axis, Roll JoyO X Axis, Yaw JoyO 3 Axis.
Only then will your stick be in proper working analog mode -

To go directly to mouse emulation mode from analog joystick mode, simply hold the
trigger button in while pressing the Emulation Mode button.
So long as you hold in the trigger you can toggle back and forth between analog and
mouse emulation modes via the Emulation Mode button.

To toggle back to default keyboard emulation mode you can press the Emulation Mode
button (without pressing the joystick trigger) and you will again get the game config
screen to disable the analog function - once done you will be in the default keyboard mode.

To go directly to mouse emulation mode from keyboard mode, simply press the Emulation
Mode button (without pressing the joystick trigger).


Future Updates:
Some controls are the same on all teirs (mostly the joystick base keys) These may gain
other functions over time, depending on their usefulness.
In addition there are still 2 unused teirs, so there is lots of room for the profile to evolve.

Pioneer background Themes available in Xpadder themes area.

Link to all above files (including my G13.lgp profile) in one downloadable archive
available here:
v5.0 Pioneer Extreme3D.Pro.Joystick.Xpadder.Profile.2013_v5.zip
http://www.mediafire.com/?btgkn3sjx0ianuu

v4.0 Extreme3D.Pro.Joystick.Xpadder.Profile.Alpha28_.2012_v4.0.zip
http://www.mediafire.com/?m3c7q5n6ld3lcx7

v3.0 Extreme3D.Pro.Xpadder.&G13.Pioneer.Profiles.10.2012.zip
http://www.mediafire.com/?lg00c77y16xggb3


Enjoy ..

Baobobafet

Pioneer Game Tip: Press ctrl -m when at the commodities market screen for more option$ ;)
Last edited by baobobafet on 16 Jun 2013, 07:17, edited 4 times in total.

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: [New] Pioneer Space Simulation (Logitech 3D Pro Joystick)

Post by Primal Fear »

Maybe you want to use the Hide Box for the images, it would make your post much smaller, it works similar to the Code Box.
Text/Images: Show
To change the title, you only need to write something like "=Profile images" behind the first hide tag
whithin the bracket
baobobafet wrote:Compatibility with Oke_Doke's Profile Converter Unknown
The Profile Converter is only for gamepads that are similar to the Xbox360pad, so no it's not compatible.

baobobafet
Posts: 12
Joined: 15 Aug 2012, 02:12
Contact:

Re: [New] Pioneer Space Simulation (Logitech 3D Pro Joystick)

Post by baobobafet »

Thanks Primal, so edited :)

baobobafet
Posts: 12
Joined: 15 Aug 2012, 02:12
Contact:

Re: Pioneer Space Simulation (Logitech 3D Pro Joystick)

Post by baobobafet »

My older v3.0 joystick config is more compatible for older alpha versions of Pioneer (pre Alpha27), since it retains the old keyboard arrangement.
A small but important update to the older 3.0 version that swaps the "view cycle" function with the "labels on/off" function. Solves issues with inadvertent changing of views, when applying upwards thrust, due to the trigger qualifier system.

Code: Select all

;--- Xpadder Profile File ---
DataType=Profile
Version=2012.05.01

[Profile Settings]

[Set Settings]
Set1StickDeadZones=64,146
Set1StickDiagonalSizes=45,1
Set1TriggerDeadZones=213,213
Set2StickDeadZones=64,146
Set2StickDiagonalSizes=45,1
Set2TriggerDeadZones=174,174
Set3StickDeadZones=66,146
Set3StickDiagonalSizes=45,1
Set3TriggerDeadZones=212,214
Set4StickDeadZones=64,148
Set4StickDiagonalSizes=45,1
Set4TriggerDeadZones=174,174
Set5StickDeadZones=64,148
Set5StickDiagonalSizes=45,1
Set5TriggerDeadZones=213,211
Set6StickDeadZones=64,146
Set6StickDiagonalSizes=45,1
Set6TriggerDeadZones=172,174

[Assignments]
Set1Button1Name=Red/Blue Mode
Set1Button1SetSelect=1
Set1Button2Name=Reset Dist2 Ship
Set1Button2Slots=Home
Set1Button3Name=Labels On/Off
Set1Button3Slots=Tab
Set1Button4Name=Cycle View
Set1Button4Slots=F1
Set1Button5Name=Zoom In
Set1Button5Slots=Equals
Set1Button6Name=Zoom Out
Set1Button6Slots=Minus
Set1Button7Name=Auto/Man
Set1Button7Slots=F5
Set1Button8Name=Ship Info
Set1Button8Slots=F3
Set1Button9Name=Comms
Set1Button9Slots=F4
Set1Button10Name=Emulation Mode
Set1Button10Toggle=1
Set1Button10SetSelect=4
Set1Button11Name=Star/System Maps
Set1Button11Slots=F2
Set1Button12Name=Gear Up/Dn
Set1Button12Slots=F6
Set1DPadUpName=View Dn
Set1DPadUpSlots=Arrow Up
Set1DPadRightName=View Right
Set1DPadRightSlots=Arrow Right
Set1DPadDownName=View Up
Set1DPadDownSlots=Arrow Down
Set1DPadLeftName=View Left
Set1DPadLeftSlots=Arrow Left
Set1Stick1UpName=Pitch Dn
Set1Stick1UpSlots=W
Set1Stick1RightName=R Roll
Set1Stick1RightSlots=E
Set1Stick1DownName=Pitch Up
Set1Stick1DownSlots=S
Set1Stick1LeftName=L Roll
Set1Stick1LeftSlots=Q
Set1Stick2RightName=R Yaw
Set1Stick2RightSlots=D
Set1Stick2LeftName=L Yaw
Set1Stick2LeftSlots=A
Set1TriggerLeftName=Scanner +
Set1TriggerLeftSlots=Left Square Bracket
Set1TriggerLeftTurboRate=25
Set1TriggerRightName=Scanner -
Set1TriggerRightSlots=Right Square Bracket
Set1TriggerRightTurboRate=25
Set2Button1Name=Red/Blue Mode
Set2Button1SetSelect=0
Set2Button2Name=Fire & LMB
Set2Button2Slots=Left Mouse Button (1),Space
Set2Button3Name=Thrust Up
Set2Button3Slots=U
Set2Button4Name=Thrust Down
Set2Button4Slots=O
Set2Button5Name=View Current Tgt
Set2Button5Slots=Left Control,F10
Set2Button6Name=Scanner Modes
Set2Button6Slots=Back-Slash[UK] (US use #),Back-Slash[US]/Hash[UK]
Set2Button7Name=Auto/Man
Set2Button7Slots=F5
Set2Button8Name=Ship Info
Set2Button8Slots=F3
Set2Button9Name=Comms
Set2Button9Slots=F4
Set2Button10Name=Emulation Mode
Set2Button10Slots=Escape
Set2Button10SetSelect=3
Set2Button11Name=Star/System Map
Set2Button11Slots=F2
Set2Button12Name=Gear Up/Dn
Set2Button12Slots=F6
Set2DPadUpName=Thrust Forward
Set2DPadUpSlots=I
Set2DPadRightName=R Thrust
Set2DPadRightSlots=L
Set2DPadDownName=Thrust Reverse
Set2DPadDownSlots=K
Set2DPadLeftName=L Thrust
Set2DPadLeftSlots=J
Set2Stick1UpName=Pitch Dn
Set2Stick1UpSlots=W
Set2Stick1UpTurboRate=25
Set2Stick1RightName=R Roll
Set2Stick1RightSlots=E
Set2Stick1RightTurboRate=25
Set2Stick1DownName=Pitch Up
Set2Stick1DownSlots=S
Set2Stick1DownTurboRate=25
Set2Stick1LeftName=L Roll
Set2Stick1LeftSlots=Q
Set2Stick1LeftTurboRate=25
Set2Stick2RightName=R Yaw
Set2Stick2RightSlots=D
Set2Stick2RightTurboRate=25
Set2Stick2LeftName=L Yaw
Set2Stick2LeftSlots=A
Set2Stick2LeftTurboRate=25
Set2TriggerLeftName=Scanner +
Set2TriggerLeftSlots=Left Square Bracket
Set2TriggerLeftTurboRate=25
Set2TriggerRightName=Scanner -
Set2TriggerRightSlots=Right Square Bracket
Set2TriggerRightTurboRate=25
Set3Button1Name=Red/Blue Mode
Set3Button1SetSelect=3
Set3Button2Name=Reset Dist2 Ship
Set3Button2Slots=Home
Set3Button3Name=Labels On/Off
Set3Button3Slots=Tab
Set3Button4Name=Cycle View
Set3Button4Slots=F1
Set3Button5Name=Zoom In
Set3Button5Slots=Equals
Set3Button6Name=Zoom Out
Set3Button6Slots=Minus
Set3Button7Name=Auto/Man
Set3Button7Slots=F5
Set3Button8Name=Ship Info
Set3Button8Slots=F3
Set3Button9Name=Comms
Set3Button9Slots=F4
Set3Button10Name=Emulation Mode
Set3Button10Slots=Escape
Set3Button10SetSelect=0
Set3Button11Name=Star/System Map
Set3Button11Slots=F2
Set3Button12Name=Gear Up/Dn
Set3Button12Slots=F6
Set3DPadUpName=View Dn
Set3DPadUpSlots=Arrow Up
Set3DPadRightName=View Right
Set3DPadRightSlots=Arrow Right
Set3DPadDownName=View Up
Set3DPadDownSlots=Arrow Down
Set3DPadLeftName=View Left
Set3DPadLeftSlots=Arrow Left
Set3Stick1RightName=A
Set3Stick1DownName=O
Set3Stick1LeftName=A
Set3Stick2UpName=N
Set3Stick2RightName=G
Set3Stick2LeftName=L
Set3TriggerLeftName=Scanner +
Set3TriggerLeftSlots=Left Square Bracket
Set3TriggerLeftTurboRate=25
Set3TriggerRightName=Scanner -
Set3TriggerRightSlots=Right Square Bracket
Set3TriggerRightTurboRate=25
Set4Button1Name=Red/Blue Mode
Set4Button1SetSelect=2
Set4Button2Name=Fire & LMB
Set4Button2Slots=Left Mouse Button (1),Space
Set4Button3Name=Thrust Up
Set4Button3Slots=U
Set4Button4Name=Thrust Down
Set4Button4Slots=O
Set4Button5Name=View Current Tgt
Set4Button5Slots=Left Control,F10
Set4Button6Name=Scanner Mode
Set4Button6Slots=Back-Slash[UK] (US use #),Back-Slash[US]/Hash[UK]
Set4Button7Name=Auto/Man
Set4Button7Slots=F5
Set4Button8Name=Ship Info
Set4Button8Slots=F3
Set4Button9Name=Comms
Set4Button9Slots=F4
Set4Button10Name=Emulation Mode
Set4Button10Toggle=1
Set4Button10SetSelect=5
Set4Button11Name=Star/System Map
Set4Button11Slots=F2
Set4Button12Name=Gear Up/Dn
Set4Button12Slots=F6
Set4DPadUpName=Thrust Forward
Set4DPadUpSlots=I
Set4DPadRightName=R Thrust
Set4DPadRightSlots=L
Set4DPadDownName=Thrust Reverse
Set4DPadDownSlots=K
Set4DPadLeftName=L Thrust
Set4DPadLeftSlots=J
Set4Stick1UpTurboRate=25
Set4Stick1RightName=A
Set4Stick1RightTurboRate=25
Set4Stick1DownName=O
Set4Stick1DownTurboRate=25
Set4Stick1LeftName=A
Set4Stick1LeftTurboRate=25
Set4Stick2UpName=N
Set4Stick2RightName=G
Set4Stick2RightTurboRate=25
Set4Stick2LeftName=L
Set4Stick2LeftTurboRate=25
Set4TriggerLeftName=Scanner +
Set4TriggerLeftSlots=Left Square Bracket
Set4TriggerLeftTurboRate=25
Set4TriggerRightName=Scanner -
Set4TriggerRightSlots=Right Square Bracket
Set4TriggerRightTurboRate=25
Set5Button1Name=Red/Blue & RMB
Set5Button1Slots=Right Mouse Button (2)
Set5Button1SetSelect=5
Set5Button2Name=Reset Dist2 Ship
Set5Button2Slots=Home
Set5Button3Name=Labels On/Off
Set5Button3Slots=Tab
Set5Button4Name=Cycle View
Set5Button4Slots=F1
Set5Button5Name=Zoom In
Set5Button5Slots=Equals
Set5Button6Name=Zoom Out
Set5Button6Slots=Minus
Set5Button7Name=Auto/Man
Set5Button7Slots=F5
Set5Button8Name=Ship Info
Set5Button8Slots=F3
Set5Button9Name=Comms
Set5Button9Slots=F4
Set5Button10Name=Emulation Mode
Set5Button10Toggle=1
Set5Button10SetSelect=0
Set5Button11Name=Star/System Map
Set5Button11Slots=F2
Set5Button12Name=Gear Up/Dn
Set5Button12Slots=F6
Set5DPadUpName=View Dn
Set5DPadUpSlots=Arrow Up
Set5DPadRightName=View R
Set5DPadRightSlots=Arrow Right
Set5DPadDownName=View Up
Set5DPadDownSlots=Arrow Down
Set5DPadLeftName=View L
Set5DPadLeftSlots=Arrow Left
Set5Stick1UpSlots=Mouse Move Down
Set5Stick1UpMouseSpeed=32
Set5Stick1RightSlots=Mouse Move Right
Set5Stick1RightMouseSpeed=32
Set5Stick1DownSlots=Mouse Move Up
Set5Stick1DownMouseSpeed=32
Set5Stick1LeftSlots=Mouse Move Left
Set5Stick1LeftMouseSpeed=32
Set5Stick2RightName=R Yaw
Set5Stick2RightSlots=E
Set5Stick2LeftName=L Yaw
Set5Stick2LeftSlots=Q
Set5TriggerLeftName=Scanner +
Set5TriggerLeftSlots=Left Square Bracket
Set5TriggerRightName=Scanner -
Set5TriggerRightSlots=Right Square Bracket
Set5TriggerRightTurboRate=25
Set6Button1Name=Red/Blue & RMB
Set6Button1Slots=Right Mouse Button (2)
Set6Button1SetSelect=4
Set6Button2Name=Fire & LMB
Set6Button2Slots=Left Mouse Button (1),Space
Set6Button3Name=Thrust Up
Set6Button3Slots=U
Set6Button4Name=Thrust Down
Set6Button4Slots=O
Set6Button5Name=View Current Tgt
Set6Button5Slots=Left Control,F10
Set6Button6Name=Scanner Mode
Set6Button6Slots=Back-Slash[UK] (US use #),Back-Slash[US]/Hash[UK]
Set6Button7Name=Auto/Man
Set6Button7Slots=F5
Set6Button8Name=Ship Info
Set6Button8Slots=F3
Set6Button9Name=Comms
Set6Button9Slots=F4
Set6Button10Name=Emulation Mode
Set6Button10Toggle=1
Set6Button10SetSelect=3
Set6Button11Name=Star/System Map
Set6Button11Slots=F2
Set6Button12Name=Gear Up/Dn
Set6Button12Slots=F6
Set6DPadUpName=Thrust Forward
Set6DPadUpSlots=I
Set6DPadRightName=R Thrust
Set6DPadRightSlots=L
Set6DPadDownName=Thrust Reverse
Set6DPadDownSlots=K
Set6DPadLeftName=L Thrust
Set6DPadLeftSlots=J
Set6Stick1UpSlots=Mouse Move Down
Set6Stick1UpMouseSpeed=32
Set6Stick1RightSlots=Mouse Move Right
Set6Stick1RightMouseSpeed=32
Set6Stick1DownSlots=Mouse Move Up
Set6Stick1DownMouseSpeed=32
Set6Stick1LeftSlots=Mouse Move Left
Set6Stick1LeftMouseSpeed=32
Set6Stick2RightName=R Yaw
Set6Stick2RightSlots=E
Set6Stick2LeftName=L Yaw
Set6Stick2LeftSlots=Q
Set6TriggerLeftName=Scanner +
Set6TriggerLeftSlots=Left Square Bracket
Set6TriggerLeftTurboRate=26
Set6TriggerRightName=Scanner -
Set6TriggerRightSlots=Right Square Bracket
Set6TriggerRightTurboRate=25
Updated templates ect. available here:
http://www.mediafire.com/?tvryc9kfsosipp3
Last edited by baobobafet on 18 Nov 2012, 01:24, edited 1 time in total.

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: Pioneer Space Simulation (Logitech 3D Pro Joystick)

Post by Primal Fear »

You can always edit your first post, if you made changes on your profile. That way it is easier to find.

baobobafet
Posts: 12
Joined: 15 Aug 2012, 02:12
Contact:

Re: Pioneer Space Simulation (Logitech 3D Pro Joystick)

Post by baobobafet »

Updated to v5.0 - A small update correcting some labeling of keys in the Xpadder window. (no effect to functionality)
As in v4.0, this profile supports the new view keys for the current version and should work for all versions of Pioneer after Alpha28.

Enjoy

Post Reply

Return to “Game Profiles”