Mass Effect 3 (X360)

Share and discuss profiles
Post Reply
cwm_spanky
Posts: 1
Joined: 01 Jun 2011, 20:49

Mass Effect 3 (X360)

Post by cwm_spanky »

Hey all, there were a couple Mass Effect 3 profiles on here but none that I liked. I originally played on the Xbox 360 myself and found myself wishing I had a control scheme similar to that. I worked for a while on this profile and it is very close to the 360 layout, or at least as close as I could get. I wasn't familiar with making profiles myself at first but through trial and error and looking through some Mass Effect 2 profiles I liked I was able to come up with this one. Let me know what you guys think.

It's almost exactly like the 360 version except you have an extra Quickslot (Quick Slot 4) mapped to the left stick button. I put the Cover Turn on the right stick button. The first 3 quickslots are mapped to Y/LB/RB just like in the game, and each of those buttons can be held down for the command hud (bumpers) or nav assist (Y). The D-Pad is all squad commands just like in the game. You can even Quick Save by holding in the Start Button. I turned up the sensitivity for the right stick quite a bit so that when in-game is at default it feels right to me. Feel free to change the mouse sensitivity in game or in profile to what you need.

You should not need to change any of the key bindings in game for this profile to work.

Code: Select all

;--- Xpadder Profile Data ---
DataType=Profile
Version=2012.12.31
Name=(Pasted Profile Mass Effect 3)
Set1Button1Name=Use/Cover/Storm
Set1Button1Slots=Space
Set1Button2Name=Melee
Set1Button2Slots=F
Set1Button3Name=Reload
Set1Button3Slots=R
Set1Button4Name=QS1/Nav
Set1Button4Slots=RELEASE ZONE 0.01s,1,RELEASE ZONE 0.15s,HOLD ZONE 0.16s,V
Set1Button5Name=QS2/HUD
Set1Button5Slots=RELEASE ZONE 0.01s,2,RELEASE ZONE 0.15s,HOLD ZONE 0.16s,Left Shift
Set1Button6Name=QS3/HUD
Set1Button6Slots=RELEASE ZONE 0.01s,3,RELEASE ZONE 0.15s,HOLD ZONE 0.16s,Left Shift
Set1Button7Name=Weap Swap/Exit
Set1Button7Slots=X
Set1Button8Name=Menu/Quick-Save
Set1Button8Slots=RELEASE ZONE 0.01s,Escape,RELEASE ZONE 0.50s,HOLD ZONE 0.51s,F5
Set1Button9Name=QS4
Set1Button9Slots=4
Set1Button10Name=Cover
Set1Button10Slots=Middle Mouse Button (3)
Set1DPadUpName=Squad Attack
Set1DPadUpSlots=Z
Set1DPadRightName=Squadmate 2
Set1DPadRightSlots=E
Set1DPadDownName=Squad Rally
Set1DPadDownSlots=C
Set1DPadLeftName=Squadmate 1
Set1DPadLeftSlots=Q
Set1Stick1UpName=Forward
Set1Stick1UpSlots=W
Set1Stick1RightName=Right
Set1Stick1RightSlots=D
Set1Stick1DownName=Back
Set1Stick1DownSlots=S
Set1Stick1LeftName=Left
Set1Stick1LeftSlots=A
Set1Stick2UpName=Look Up
Set1Stick2UpSlots=Mouse Move Up
Set1Stick2UpMouseSpeed=100
Set1Stick2RightName=Look Right
Set1Stick2RightSlots=Mouse Move Right
Set1Stick2RightMouseSpeed=100
Set1Stick2DownName=Look Down
Set1Stick2DownSlots=Mouse Move Down
Set1Stick2DownMouseSpeed=100
Set1Stick2LeftName=Look Left
Set1Stick2LeftSlots=Mouse Move Left
Set1Stick2LeftMouseSpeed=100
Set1TriggerLeftName=Aim
Set1TriggerLeftSlots=Right Mouse Button (2)
Set1TriggerRightName=Shoot
Set1TriggerRightSlots=Left Mouse Button (1)
Image

goodcitizenproject
Posts: 1
Joined: 24 Feb 2014, 04:20

Re: Mass Effect 3 (X360)

Post by goodcitizenproject »

For some reason this version wont shoot? I can aim down the sights but RT does nothing

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: Mass Effect 3 (X360)

Post by Primal Fear »

The profile is OK, LMB is assigned to LT. Check that binding of this actions in the game is still on LMB.
Also open the Xpadder settings by clicking on the button with the tool symbol in the upper right of the main window and make sure that in the Options setting "Use Xinput (if installed)" is checked (the first entry under "Running".

Post Reply

Return to “Game Profiles”