Wing Commander 1 and 2 (Xbox 360 or One Controller)

Share and discuss profiles
Post Reply
donalbane
Posts: 9
Joined: 01 May 2012, 19:11
Contact:

Wing Commander 1 and 2 (Xbox 360 or One Controller)

Post by donalbane »

I saw someone had requested a Wing Commander profile. Luckily, the same profile can work for both WC1 and WC2, as the only new addition to the sequel is the need to hold down the Autopilot button in order to activate the Jump drive in Wing Commander 2's Excalibur and the ability to send messages with without navigating the coms menu which is unique to part 2.

Please feel free to offer any suggestions, and I hope this profile allows you to enjoy these wonderful games better than ever before. IMPORTANT= You need to hit CTL+F1 when DosBox Starts to enter the key binder and delete all the joystick button assignments before using these profiles. There are 4 of them in total... just select button 1 (located adjacent to the the X and Y Axis boxes) and hit Delete so it won't register anything, then Save. Then do the same for buttons 2-4. Save the Binder and exit.


Wing Commander 1 and 2 (Xbox 360 and Xbox One controller)

MOVEMENT
Steering (Y Axis Inverted) = L Stick
Roll Left = R Stick Left
Roll Right = R Stick Right
Accelerate = R Stick Up
Decelerate = R Stick Down
Afterburner = Hold R Stick Button
Autopilot = Click L Stick Button
Jump (Wing Commander 2 only) = Hold L Stick Button

WEAPONS
Fire Guns = R Trigger
Cycle Gun Selection = R Bumper
Fire Missile = L Trigger
Cycle Missile Selection = L Bumper

HUD
Cycle Targets = Tap Y
Lock Target = Hold Y
Open Navigation Screen = B
Exit Navigation Screen = Hold B
Cycle Damaged Systems = A
Communications Menu = X
Select Communication 1 = Hold Start and Up on L Stick
Select Communication 2 = Hold Start and Right on L Stick
Select Communication 3 = Hold Start and Down on L Stick
Select Communication 4 = Hold Start and Left on L Stick
Select Communication 5 = Hold Start and Click L Stick Button
Select Communication 6 = Hold Start and Hold L Stick Button

CAMERAS

Forward Cam = Press D Pad Up
Toggle Missile Cam = Hold Pad Up
Left Cam/Turret = D Pad Left
Right Cam/Turret = D Pad Right
Rear Cam/Turret = Press D Pad Down
Chase Cam = Hold D Pad Down
Tactical Cam = Hold Select and hit Left on D Pad
Battle Can = Hold Select and hit Right on D Pad
Cycle Tailing Views = Hold Select and hit Down on D Pad Repeatedly

SEND MESSAGES
(WC2 Only)
Break and Attack = Hold Select and hit Up on D pad
Taunt Enemy = Hold Select and hold Up on D Pad
Attack My Target = Hold Select and hit Y
Status Report = Hold Select and hit X
Help Me Out = Hold Select and hit B
Form On My Wing = Hold Select and hit A


MISCELANEOUS

Pause = Select
Eject = Hold Start + Select for 2 seconds
Use Mouse (On Tiger’s Claw) = Hold Start + D Pad or Hold Start + R Stick
Right Click Mouse = Hold Start + R Trigger
ESC Key (for exiting cut scenes) = Hold Start + L Trigger

Code: Select all

;--- Xpadder Profile Data ---
DataType=Profile
Version=2011.02.09
Name=Wing Commander 1 + 2
Set1Stick2Mode=Vertical
Set1Button1Name=Damage
Set1Button1Slots=D
Set1Button2Name=NavMap/ExitNav
Set1Button2Slots=RELEASE ZONE 0.01s,N,RELEASE ZONE 0.30s,HOLD ZONE 0.31s,Escape
Set1Button3Name=Coms/Landing
Set1Button3Slots=RELEASE ZONE 0.01s,C,RELEASE ZONE 0.29s,HOLD ZONE 0.30s,C,PAUSE 0.50s,2,PAUSE 0.50s,1
Set1Button4Name=Targeting/Lock
Set1Button4Slots=RELEASE ZONE 0.01s,T,RELEASE ZONE 0.30s,HOLD ZONE 0.31s,L
Set1Button5Name=Cycle Weapons
Set1Button5Slots=W
Set1Button6Name=Cycle Guns
Set1Button6Slots=G
Set1Button7Name=Pause
Set1Button7Slots=P
Set1Button8Name=Set 2 
Set1Button8SetSelect=1
Set1Button9Name=Auto/Jump
Set1Button9Slots=RELEASE ZONE 0.01s,A,RELEASE ZONE 0.49s,HOLD ZONE 0.50s,J
Set1Button10Name=Afterburner
Set1Button10Slots=Tab
Set1Button10Rumble=1
Set1DPadUpName=Forward/Missile
Set1DPadUpSlots=RELEASE ZONE 0.01s,F1,RELEASE ZONE 0.29s,HOLD ZONE 0.30s,F8
Set1DPadRightName=Right View
Set1DPadRightSlots=F3
Set1DPadDownName=Rear/Chase
Set1DPadDownSlots=RELEASE ZONE 0.01s,F4,RELEASE ZONE 0.30s,HOLD ZONE 0.31s,F5
Set1DPadLeftName=Left View
Set1DPadLeftSlots=F2
Set1Stick1UpName=Steer
Set1Stick1UpMouseSpeed=32
Set1Stick1RightName=Steer
Set1Stick1RightMouseSpeed=32
Set1Stick1DownName=Steer
Set1Stick1DownMouseSpeed=32
Set1Stick1LeftName=Steer
Set1Stick1LeftMouseSpeed=32
Set1Stick2UpName=Accelerate
Set1Stick2UpSlots=Equals
Set1Stick2RightName=Roll R
Set1Stick2RightSlots=Dot
Set1Stick2DownName=Slow Down
Set1Stick2DownSlots=Minus
Set1Stick2LeftName=Roll L
Set1Stick2LeftSlots=Comma
Set1TriggerLeftName=Fire Missile
Set1TriggerLeftSlots=NumPad Enter
Set1TriggerRightName=Fire Guns
Set1TriggerRightSlots=Space
Set2Button1Name=From Up
Set2Button1Slots=Alt,PAUSE 0.00s,Alt,F
Set2Button2Name=Help Me Out
Set2Button2Slots=Alt,PAUSE 0.00s,Alt,H
Set2Button3Name=Status Rpt
Set2Button3Slots=Alt,PAUSE 0.00s,Alt,D
Set2Button4Name=Attack My Tgt
Set2Button4Slots=Alt,PAUSE 0.00s,Alt,A
Set2Button7Name=Eject
Set2Button7Slots=Left Control,PAUSE 0.00s,Left Control,E
Set2Button8SetSelect=0
Set2Button9Name=5/6
Set2Button9Slots=RELEASE ZONE 0.01s,5,RELEASE ZONE 0.19s,HOLD ZONE 0.20s,6
Set2DPadUpName=Break/Taunt
Set2DPadUpSlots=RELEASE ZONE 0.01s,Alt,PAUSE 0.00s,Alt,B,RELEASE ZONE 0.29s,HOLD ZONE 0.30s,Alt,PAUSE 0.00s,Alt,T
Set2DPadUpMouseSpeed=32
Set2DPadRightName=Battle View
Set2DPadRightSlots=F6
Set2DPadRightMouseSpeed=32
Set2DPadDownName=Tailing Views
Set2DPadDownSlots=F9
Set2DPadDownMouseSpeed=32
Set2DPadLeftName=Tactical View
Set2DPadLeftSlots=F7
Set2DPadLeftMouseSpeed=32
Set2Stick1UpName=1
Set2Stick1UpSlots=DISTANCE ZONE 100%,RELEASE ZONE 0.10s,1
Set2Stick1UpMouseSpeed=32
Set2Stick1RightName=2
Set2Stick1RightSlots=DISTANCE ZONE 100%,RELEASE ZONE 0.10s,2
Set2Stick1RightMouseSpeed=32
Set2Stick1DownName=3
Set2Stick1DownSlots=DISTANCE ZONE 100%,RELEASE ZONE 0.10s,3
Set2Stick1DownMouseSpeed=32
Set2Stick1LeftName=4
Set2Stick1LeftSlots=DISTANCE ZONE 100%,RELEASE ZONE 0.10s,4
Set2Stick1LeftMouseSpeed=32
Set2Stick2UpName=Mouse
Set2Stick2UpSlots=Mouse Move Up
Set2Stick2UpMouseSpeed=32
Set2Stick2RightName=Mouse
Set2Stick2RightSlots=Mouse Move Right
Set2Stick2RightMouseSpeed=32
Set2Stick2DownName=Mouse
Set2Stick2DownSlots=Mouse Move Down
Set2Stick2DownMouseSpeed=32
Set2Stick2LeftName=Mouse
Set2Stick2LeftSlots=Mouse Move Left
Set2Stick2LeftMouseSpeed=32
Set2TriggerLeftName=Esc
Set2TriggerRightName=R Click
Set2TriggerRightSlots=Left Mouse Button (1)

Post Reply

Return to “Game Profiles”