Battlefield: Bad Company 2 (X360)

Share and discuss profiles
Post Reply
PHALLASS
Posts: 9
Joined: 05 Mar 2010, 10:02
Contact:

Battlefield: Bad Company 2 (X360)

Post by PHALLASS »

OK i have been working on this profile for a few days now, and i think i have the best possible setup.
Remember Setup the bad company profile on xpadder, but turn off the controller before entering the game
wait until the main menu screen has fully loaded before you enable the controller, too avoid joystick problems.

Set in-game
Mouse Sensitivity settings to: .70
Mouse Acceleration should be: ON

Toggeling left trigger is sights.
The sensitivity will slow down when aiming down the sights, for better accuracy at range. - Thanks to SGT.cabledog.

Right bumper
to switch between your pistol and your Main Weapon.

Left directional pad
Switch between your Special Items

To change positions in vehicles
While holding left trigger, tap the left direction, on the direction pad, this will cylce you to the next position when you click it.

all other controllers are obvious at a glance at the controller image in Xpadder.

Please refrain from changing any settings,
if you are not comfortable with the settings or the sensitivity.
Stick with it, i have meticulously tweaked all the settings. It might seem strange at first,
but with enough experience, you will have a comfortable advantage over KB&M users.

You might want to setup a fake profile at first in game, because you will die many times while you get used to the settings,
trust me the sensitivity might seem fast at first, but it is necessary to keep up with KB&M users.

Helicopter settings, need to be changed in game.
Roll, should be the mouse X axis
Yaw up and down, should be the mouse Y axis.
And the other directional settings on W A S and D respectivly, these settings are completely customizable, but make sure nothing is
attached to the -> diretional arrows, just be sure the movement is attached to the mouse or WASD and you will be fine.


Vehicles feel very comfortable, this is where you will excel past KB&M users once you get used to it.

A few issues
Crouch is un-toggled when you aim down sights with left trigger, its not a game breaker but it can be a little annoying at times, you will
get used to it and learn to live with it, until the next version of Xpadder hopefully solves this.
(Crouch is a Hold down in-game, but we as Xpadder fanatics can set it to toggle, so much better. +1 over KB&M users once more.


I am still configuring VOIP,
right now you hold Up on the direction pad for more then 1.4 settings to enable voip, i don't know if it works because
people are not responding to me, but that's not an exact science.


If you experince other controll issues , it might be a game thing, the game is still in need of massive pathes IMHO

There are other minor issues, but i cant remember them, maybe becuase they are so minor :)

Conclusion
Stick with my settings, and you will be ducking and weaving in no time.
Remember to always spot infantry and vehicles you cannot take down your self with the "Spot" on the UP directional pad.

So enjoy this great game just like you would on the Xbox 360, with a few exceptions.


Copy and paste this code into xpadder paste option.

Code: Select all

;----------------------
; Xpadder Profile File
;----------------------

Version=5.7

[Profile Settings]

[Set Settings]
Set1StickDeadZones=102,69
Set1StickDiagonalSizes=44,42
Set2StickDeadZones=102,64

[Assignments]
Set1Button1Name=Jump
Set1Button1Slots=Space
Set1Button2Name=USE
Set1Button2Slots=E
Set1Button3Name=Reload
Set1Button3Slots=R
Set1Button4Name=Melee
Set1Button4Slots=Middle Mouse Button (3)
Set1Button5Name= Grenade
Set1Button5Slots=G
Set1Button6Name=Pistol/_main_wep
Set1Button6Slots=1,CYCLE STOP,2
Set1Button7Name=Scoreboard
Set1Button7Slots=Tab
Set1Button8Name=Pause/ESC
Set1Button8Slots=Escape
Set1Button9Name=Sprint
Set1Button9Slots=Left Shift
Set1Button10Name=Crouch
Set1Button10Slots=Left Control
Set1Button10Toggle=1
Set1Button10TurboRate=4
Set1DPadUpName=Spot
Set1DPadUpSlots=Q,Alt,HOLD ZONE 1.40s
Set1DPadRightName=Camera
Set1DPadRightSlots=C
Set1DPadDownName=Look_behind
Set1DPadDownSlots=V
Set1DPadLeftName=Special 1/2
Set1DPadLeftSlots=3,CYCLE STOP,4,CYCLE STOP,3,CYCLE STOP,4,CYCLE STOP,3,CYCLE STOP,4,CYCLE STOP,3
Set1Stick1UpName=Forward
Set1Stick1UpSlots=W
Set1Stick1RightName=Right
Set1Stick1RightSlots=D
Set1Stick1DownName=Back
Set1Stick1DownSlots=S
Set1Stick1LeftName=Left
Set1Stick1LeftSlots=A
Set1Stick2UpName=Look
Set1Stick2UpSlots=Mouse Move Up
Set1Stick2UpMouseSpeed=36
Set1Stick2RightName=Look
Set1Stick2RightSlots=Mouse Move Right
Set1Stick2RightMouseSpeed=36
Set1Stick2DownName=Look
Set1Stick2DownSlots=Mouse Move Down
Set1Stick2DownMouseSpeed=36
Set1Stick2LeftName=Look
Set1Stick2LeftSlots=Mouse Move Left
Set1Stick2LeftMouseSpeed=36
Set1Stick2UpLeftSlots=Left Control,Left Shift
Set1TriggerLeftName=Sights
Set1TriggerLeftSetSelect=1
Set1TriggerRightName=Fire
Set1TriggerRightSlots=Left Mouse Button (1)
Set1TriggerRightRumble=1
Set1TriggerRightRumbleStrengths=255,255
Set2Button1Slots=Space
Set2Button2Slots=E
Set2Button3Slots=F1
Set2Button4Slots=Middle Mouse Button (3)
Set2Button5Slots=G
Set2Button6Slots=1
Set2Button7Slots=Tab
Set2Button8Slots=Escape
Set2Button9Slots=Left Shift
Set2Button10Slots=Left Control
Set2Button10Toggle=1
Set2Button10TurboRate=3
Set2DPadUpSlots=Q
Set2DPadRightSlots=4
Set2DPadDownSlots=2
Set2DPadLeftName=Cycle_Positions
Set2DPadLeftSlots=F1,CYCLE STOP,F2,CYCLE STOP,F3,CYCLE STOP,F4,CYCLE STOP,F5,CYCLE STOP,F1,CYCLE STOP,F2,CYCLE STOP,F3,CYCLE STOP,F4,CYCLE STOP,F5,CYCLE STOP,F1
Set2Stick1UpSlots=Arrow Up
Set2Stick1RightSlots=Arrow Right
Set2Stick1DownSlots=Arrow Down
Set2Stick1LeftSlots=Arrow Left
Set2Stick2UpSlots=Mouse Move Up
Set2Stick2UpMouseSpeed=16
Set2Stick2RightSlots=Mouse Move Right
Set2Stick2RightMouseSpeed=19
Set2Stick2DownSlots=Mouse Move Down
Set2Stick2DownMouseSpeed=16
Set2Stick2LeftSlots=Mouse Move Left
Set2Stick2LeftMouseSpeed=19
Set2TriggerLeftSlots=Right Mouse Button (2)
Set2TriggerLeftSetSelect=0
Set2TriggerRightSlots=Left Mouse Button (1)
Set2TriggerRightRumble=1

PHALLASS
Posts: 9
Joined: 05 Mar 2010, 10:02
Contact:

Re: Best BAD COMPANY 2 profile (X360)

Post by PHALLASS »

Update:

For the UAV chopper place
Ascend: Middle mouse button - Y
Decend: R - x

johnboyrambo

Re: Best BAD COMPANY 2 profile (X360)

Post by johnboyrambo »

hi thnx for your bc2 profile it works realy well for me my kills are improving now thanks alot add me on bc2 johnboyrambo

phallas

Re: Best BAD COMPANY 2 profile (X360)

Post by phallas »

Hehe will do

clarenceb5
Posts: 2
Joined: 22 Oct 2009, 17:12

Re: Best BAD COMPANY 2 profile (X360)

Post by clarenceb5 »

Anyone know how to disable the joystick support for Bad Company 2? The profile works great but when I click the right analogue stick on my controller it takes me to the pause menu. I think this happens because the game has joystick support. Thanks.

mnl1121
Xpadder Xpert
Posts: 391
Joined: 26 Aug 2009, 22:27
Location: New Jersey
Contact:

Re: Best BAD COMPANY 2 profile (X360)

Post by mnl1121 »

Start up the game with your controller UNPLUGGED. Once the game is fully started plug it in. The game will disable controller support b/c it didn't see it plugged in when the game started.

clarenceb5
Posts: 2
Joined: 22 Oct 2009, 17:12

Re: Best BAD COMPANY 2 profile (X360)

Post by clarenceb5 »

Excellent! Thanks it works. This profile is awesome thanks for creating it. I have been using xpadder for a while now but have not yet learned how to create my own so I am grateful to all those who post their profiles here. Thanks again!

ianmcgowan
Posts: 4
Joined: 28 Dec 2009, 13:36

Re: Best BAD COMPANY 2 profile (X360)

Post by ianmcgowan »

I'll give this a go

road hammer
Posts: 1
Joined: 05 Dec 2010, 04:13

Re: Best BAD COMPANY 2 profile (X360)

Post by road hammer »

i dont like this side by side the 360 is best zoom i set to tog but if i hold L tg i can not move at all and the d pad L but u can not swich back to your gun you got to hit Rb to get back to your gun this is a ok profile for just playing but NOT for hardcore gameing ware mill sec count

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: Best BAD COMPANY 2 profile (X360)

Post by Primal Fear »

For what are the arrow keys good for in Set2 (left stick)? Or is this a failure, so it has to be WASD?

thewookie97
Posts: 2
Joined: 17 Jul 2010, 18:37

Re: Best BAD COMPANY 2 profile (X360)

Post by thewookie97 »

tbh Your Profile was really good in terms of the axises Sensitivity and other things like that. Personal I moved some buttons around to make it more like the Xbox 360 version because I've played it for 700 hours :D
There are a few things different but I thought I would share my changes to your overall design.
Great work overall tho :D
I also added movement while in Iron Sights.

Code: Select all

;--- Xpadder Profile Data ---
Version=2010.06.03
Name=BC 2
Set1StickDeadZones=102,69
Set1StickDiagonalSizes=44,42
Set2StickDeadZones=102,64
Set1Button1Name=Jump
Set1Button1Slots=Space
Set1Button2Name=USE
Set1Button2Slots=E
Set1Button3Name=Reload
Set1Button3Slots=R
Set1Button4Name=Pistol/Main
Set1Button4Slots=1,CYCLE STOP,2
Set1Button5Name= Grenade
Set1Button5Slots=G
Set1Button6Name=Melee
Set1Button6Slots=Middle Mouse Button (3)
Set1Button7Name=Spot
Set1Button7Slots=Q
Set1Button8Name=Pause/ESC
Set1Button8Slots=Tab
Set1Button9Name=Sprint
Set1Button9Slots=Left Shift
Set1Button10Name=Crouch
Set1Button10Slots=Left Control
Set1Button10Toggle=1
Set1Button10TurboRate=4
Set1Button10Rumble=1
Set1DPadUpName=Change Seat
Set1DPadUpSlots=F1,CYCLE STOP,F2,CYCLE STOP,F3,CYCLE STOP,F4,CYCLE STOP,F5,CYCLE STOP,F1,CYCLE STOP,F2,CYCLE STOP,F3,CYCLE STOP,F4,CYCLE STOP,F5
Set1DPadRightName=4
Set1DPadRightSlots=4
Set1DPadDownName=Change Veiw Look behind
Set1DPadDownSlots=C,CYCLE STOP,V
Set1DPadLeftName=3
Set1DPadLeftSlots=3
Set1Stick1UpName=Forward
Set1Stick1UpSlots=W
Set1Stick1RightName=Right
Set1Stick1RightSlots=D
Set1Stick1DownName=Back
Set1Stick1DownSlots=S
Set1Stick1LeftName=Left
Set1Stick1LeftSlots=A
Set1Stick2UpName=Look
Set1Stick2UpSlots=Mouse Move Up
Set1Stick2UpMouseSpeed=36
Set1Stick2RightName=Look
Set1Stick2RightSlots=Mouse Move Right
Set1Stick2RightMouseSpeed=36
Set1Stick2DownName=Look
Set1Stick2DownSlots=Mouse Move Down
Set1Stick2DownMouseSpeed=36
Set1Stick2LeftName=Look
Set1Stick2LeftSlots=Mouse Move Left
Set1Stick2LeftMouseSpeed=36
Set1Stick2UpLeftSlots=Left Control,Left Shift
Set1TriggerLeftName=Sights
Set1TriggerLeftSetSelect=1
Set1TriggerRightName=Fire
Set1TriggerRightSlots=Left Mouse Button (1)
Set1TriggerRightRumble=1
Set1TriggerRightRumbleStrengths=255,255
Set2Button1Slots=Space
Set2Button2Slots=E
Set2Button3Slots=R
Set2Button4Slots=2
Set2Button5Slots=G
Set2Button6Slots=Middle Mouse Button (3)
Set2Button7Slots=Q
Set2Button8Slots=Escape
Set2Button9Slots=Left Shift
Set2Button10Slots=Left Control
Set2Button10Toggle=1
Set2Button10TurboRate=3
Set2DPadUpSlots=Tab
Set2DPadRightSlots=4
Set2DPadDownSlots=2
Set2DPadLeftName=3
Set2DPadLeftSlots=3
Set2Stick1UpSlots=W
Set2Stick1RightSlots=D
Set2Stick1DownSlots=S
Set2Stick1LeftSlots=A
Set2Stick2UpSlots=Mouse Move Up
Set2Stick2UpMouseSpeed=16
Set2Stick2RightSlots=Mouse Move Right
Set2Stick2RightMouseSpeed=19
Set2Stick2DownSlots=Mouse Move Down
Set2Stick2DownMouseSpeed=16
Set2Stick2LeftSlots=Mouse Move Left
Set2Stick2LeftMouseSpeed=19
Set2TriggerLeftSlots=Right Mouse Button (2)
Set2TriggerLeftSetSelect=0
Set2TriggerRightSlots=Left Mouse Button (1)
Set2TriggerRightRumble=1

xyzeratul
Posts: 2
Joined: 01 Jan 2011, 12:35

Re: Best BAD COMPANY 2 profile (X360)

Post by xyzeratul »

hi, thx for this profile. but just as I am new to this, I wana to know is it safe to play on PB servers? cuz I only try it in SP, now I am about move to MP.

thewookie97
Posts: 2
Joined: 17 Jul 2010, 18:37

Re: Best BAD COMPANY 2 profile (X360)

Post by thewookie97 »

xyzeratul wrote:hi, thx for this profile. but just as I am new to this, I wana to know is it safe to play on PB servers? cuz I only try it in SP, now I am about move to MP.
It seems to work fine with no PB kicks on Bad Company 2 but when I went into BF2 with xpadder on in the backround it kicked me.

firesq38
Posts: 1
Joined: 02 Mar 2011, 22:23

Re: Best BAD COMPANY 2 profile (X360)

Post by firesq38 »

What changes do I need to make to get the UAV, etc working. Is it the same as above? if so, is that in game changes?
thewookie97 wrote:tbh Your Profile was really good in terms of the axises Sensitivity and other things like that. Personal I moved some buttons around to make it more like the Xbox 360 version because I've played it for 700 hours :D
There are a few things different but I thought I would share my changes to your overall design.
Great work overall tho :D
I also added movement while in Iron Sights.

Code: Select all

;--- Xpadder Profile Data ---
Version=2010.06.03
Name=BC 2
Set1StickDeadZones=102,69
Set1StickDiagonalSizes=44,42
Set2StickDeadZones=102,64
Set1Button1Name=Jump
Set1Button1Slots=Space
Set1Button2Name=USE
Set1Button2Slots=E
Set1Button3Name=Reload
Set1Button3Slots=R
Set1Button4Name=Pistol/Main
Set1Button4Slots=1,CYCLE STOP,2
Set1Button5Name= Grenade
Set1Button5Slots=G
Set1Button6Name=Melee
Set1Button6Slots=Middle Mouse Button (3)
Set1Button7Name=Spot
Set1Button7Slots=Q
Set1Button8Name=Pause/ESC
Set1Button8Slots=Tab
Set1Button9Name=Sprint
Set1Button9Slots=Left Shift
Set1Button10Name=Crouch
Set1Button10Slots=Left Control
Set1Button10Toggle=1
Set1Button10TurboRate=4
Set1Button10Rumble=1
Set1DPadUpName=Change Seat
Set1DPadUpSlots=F1,CYCLE STOP,F2,CYCLE STOP,F3,CYCLE STOP,F4,CYCLE STOP,F5,CYCLE STOP,F1,CYCLE STOP,F2,CYCLE STOP,F3,CYCLE STOP,F4,CYCLE STOP,F5
Set1DPadRightName=4
Set1DPadRightSlots=4
Set1DPadDownName=Change Veiw Look behind
Set1DPadDownSlots=C,CYCLE STOP,V
Set1DPadLeftName=3
Set1DPadLeftSlots=3
Set1Stick1UpName=Forward
Set1Stick1UpSlots=W
Set1Stick1RightName=Right
Set1Stick1RightSlots=D
Set1Stick1DownName=Back
Set1Stick1DownSlots=S
Set1Stick1LeftName=Left
Set1Stick1LeftSlots=A
Set1Stick2UpName=Look
Set1Stick2UpSlots=Mouse Move Up
Set1Stick2UpMouseSpeed=36
Set1Stick2RightName=Look
Set1Stick2RightSlots=Mouse Move Right
Set1Stick2RightMouseSpeed=36
Set1Stick2DownName=Look
Set1Stick2DownSlots=Mouse Move Down
Set1Stick2DownMouseSpeed=36
Set1Stick2LeftName=Look
Set1Stick2LeftSlots=Mouse Move Left
Set1Stick2LeftMouseSpeed=36
Set1Stick2UpLeftSlots=Left Control,Left Shift
Set1TriggerLeftName=Sights
Set1TriggerLeftSetSelect=1
Set1TriggerRightName=Fire
Set1TriggerRightSlots=Left Mouse Button (1)
Set1TriggerRightRumble=1
Set1TriggerRightRumbleStrengths=255,255
Set2Button1Slots=Space
Set2Button2Slots=E
Set2Button3Slots=R
Set2Button4Slots=2
Set2Button5Slots=G
Set2Button6Slots=Middle Mouse Button (3)
Set2Button7Slots=Q
Set2Button8Slots=Escape
Set2Button9Slots=Left Shift
Set2Button10Slots=Left Control
Set2Button10Toggle=1
Set2Button10TurboRate=3
Set2DPadUpSlots=Tab
Set2DPadRightSlots=4
Set2DPadDownSlots=2
Set2DPadLeftName=3
Set2DPadLeftSlots=3
Set2Stick1UpSlots=W
Set2Stick1RightSlots=D
Set2Stick1DownSlots=S
Set2Stick1LeftSlots=A
Set2Stick2UpSlots=Mouse Move Up
Set2Stick2UpMouseSpeed=16
Set2Stick2RightSlots=Mouse Move Right
Set2Stick2RightMouseSpeed=19
Set2Stick2DownSlots=Mouse Move Down
Set2Stick2DownMouseSpeed=16
Set2Stick2LeftSlots=Mouse Move Left
Set2Stick2LeftMouseSpeed=19
Set2TriggerLeftSlots=Right Mouse Button (2)
Set2TriggerLeftSetSelect=0
Set2TriggerRightSlots=Left Mouse Button (1)
Set2TriggerRightRumble=1

nalyo4444
Posts: 2
Joined: 28 Aug 2011, 05:51
Contact:

Re: Best BAD COMPANY 2 profile (X360)

Post by nalyo4444 »

im new and having a hell of a time with this where do i paste this into there are 3 paste options

SGTCableDog
Xpadder Xpert
Posts: 1118
Joined: 27 Aug 2009, 03:35
Location: Minnesota, USA
Contact:

Re: Best BAD COMPANY 2 profile (X360)

Post by SGTCableDog »

nalyo4444 wrote:im new and having a hell of a time with this where do i paste this into there are 3 paste options
Use the profile menu on the right side.
Image

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: Best BAD COMPANY 2 profile (X360)

Post by Primal Fear »

JonnyReDHeD wrote:ok using firesq38's thewookie97's BC2 profile

I have my left trigger as sights(aim) + crouch which is good, but if I then wanted to stand again while still aiming is there a way to do this by clicking my right stick button which is the normal crouch. so kind of while in set2 using left trigger sights+crouch to cancel just the crouch I click right stick. Or something to cancel the crouch but maintain the aim. dropping to aim is good for me most of the time but say in BF3 i want to stand or move standing up while aiming.

can I have both these things or just one of them, seems I can aim and crouch with just left trigger in both games but how to then quickly cancel the crouch... or have a second aim which does not crouch. if some quick button could do that, so i have the two aim options, one aim+crouch and another just aim.


-Jonny
This modification of that profile works like that.

Code: Select all

;--- Xpadder Profile Data ---
DataType=Profile
Version=2011.07.25
Name=BC 2 mod
Set1StickDeadZones=102,69
Set1StickDiagonalSizes=44,42
Set1TriggerDeadZones=5,5
Set2StickDeadZones=102,64
Set2TriggerDeadZones=5,5
Set3TriggerDeadZones=5,5
Set4TriggerDeadZones=5,5
Set5TriggerDeadZones=5,5
Set6TriggerDeadZones=5,5
Set7TriggerDeadZones=5,5
Set8TriggerDeadZones=5,5
Set1Button1Name=Jump
Set1Button1Slots=Space
Set1Button2Name=USE
Set1Button2Slots=E
Set1Button3Name=Reload
Set1Button3Slots=R
Set1Button4Name=Pistol/Main
Set1Button4Slots=1,CYCLE STOP,2
Set1Button5Name= Grenade
Set1Button5Slots=G
Set1Button6Name=Melee
Set1Button6Slots=Middle Mouse Button (3)
Set1Button7Name=Spot
Set1Button7Slots=Q
Set1Button8Name=Pause/ESC
Set1Button8Slots=Tab
Set1Button9Name=Sprint
Set1Button9Slots=Left Shift
Set1Button10Name=Crouch
Set1Button10Slots=Left Control
Set1Button10Toggle=1
Set1Button10TurboRate=4
Set1Button10Rumble=1
Set1DPadUpName=Change Seat
Set1DPadUpSlots=F1,CYCLE STOP,F2,CYCLE STOP,F3,CYCLE STOP,F4,CYCLE STOP,F5,CYCLE STOP,F1,CYCLE STOP,F2,CYCLE STOP,F3,CYCLE STOP,F4,CYCLE STOP,F5
Set1DPadRightName=4
Set1DPadRightSlots=4
Set1DPadDownName=Change Veiw Look behind
Set1DPadDownSlots=C,CYCLE STOP,V
Set1DPadLeftName=3
Set1DPadLeftSlots=3
Set1Stick1UpName=Forward
Set1Stick1UpSlots=W
Set1Stick1RightName=Right
Set1Stick1RightSlots=D
Set1Stick1DownName=Back
Set1Stick1DownSlots=S
Set1Stick1LeftName=Left
Set1Stick1LeftSlots=A
Set1Stick2UpName=Look
Set1Stick2UpSlots=Mouse Move Up
Set1Stick2UpMouseSpeed=36
Set1Stick2RightName=Look
Set1Stick2RightSlots=Mouse Move Right
Set1Stick2RightMouseSpeed=36
Set1Stick2DownName=Look
Set1Stick2DownSlots=Mouse Move Down
Set1Stick2DownMouseSpeed=36
Set1Stick2LeftName=Look
Set1Stick2LeftSlots=Mouse Move Left
Set1Stick2LeftMouseSpeed=36
Set1Stick2UpLeftSlots=Left Control,Left Shift
Set1TriggerLeftName=Sights
Set1TriggerLeftSetSelect=1
Set1TriggerRightName=Fire
Set1TriggerRightSlots=Left Mouse Button (1)
Set1TriggerRightRumble=1
Set1TriggerRightRumbleStrengths=255,255
Set2Button1Slots=Space
Set2Button2Slots=E
Set2Button3Slots=R
Set2Button4Slots=2
Set2Button5Slots=G
Set2Button6Slots=Middle Mouse Button (3)
Set2Button7Slots=Q
Set2Button8Slots=Escape
Set2Button9Slots=Left Shift
Set2Button10Toggle=1
Set2Button10SetSelect=2
Set2DPadUpSlots=Tab
Set2DPadRightSlots=4
Set2DPadDownSlots=2
Set2DPadLeftName=3
Set2DPadLeftSlots=3
Set2Stick1UpSlots=W
Set2Stick1RightSlots=D
Set2Stick1DownSlots=S
Set2Stick1LeftSlots=A
Set2Stick2UpSlots=Mouse Move Up
Set2Stick2UpMouseSpeed=16
Set2Stick2RightSlots=Mouse Move Right
Set2Stick2RightMouseSpeed=19
Set2Stick2DownSlots=Mouse Move Down
Set2Stick2DownMouseSpeed=16
Set2Stick2LeftSlots=Mouse Move Left
Set2Stick2LeftMouseSpeed=19
Set2TriggerLeftSlots=Right Mouse Button (2),Left Control
Set2TriggerLeftSetSelect=0
Set2TriggerRightSlots=Left Mouse Button (1)
Set2TriggerRightRumble=1
Set3Button1Slots=Space
Set3Button2Slots=E
Set3Button3Slots=R
Set3Button4Slots=2
Set3Button5Slots=G
Set3Button6Slots=Middle Mouse Button (3)
Set3Button7Slots=Q
Set3Button8Slots=Escape
Set3Button9Slots=Left Shift
Set3Button10Toggle=1
Set3Button10SetSelect=1
Set3DPadUpSlots=Tab
Set3DPadRightSlots=4
Set3DPadDownSlots=2
Set3DPadLeftName=3
Set3DPadLeftSlots=3
Set3Stick1UpSlots=W
Set3Stick1RightSlots=D
Set3Stick1DownSlots=S
Set3Stick1LeftSlots=A
Set3Stick2UpSlots=Mouse Move Up
Set3Stick2UpMouseSpeed=16
Set3Stick2RightSlots=Mouse Move Right
Set3Stick2RightMouseSpeed=19
Set3Stick2DownSlots=Mouse Move Down
Set3Stick2DownMouseSpeed=16
Set3Stick2LeftSlots=Mouse Move Left
Set3Stick2LeftMouseSpeed=19
Set3TriggerLeftSlots=Right Mouse Button (2)
Set3TriggerLeftSetSelect=0
Set3TriggerRightSlots=Left Mouse Button (1)
Set3TriggerRightRumble=1

Jackal
Posts: 3
Joined: 26 Nov 2012, 19:45
Contact:

Re: Battlefield: Bad Company 2 (X360)

Post by Jackal »

Not sure which of these I should copy and insert...the first one or the last one?
Plus I tried the one from the Wookie but my weapon just does not reload..try redoing the button mapping for reload (R) nothing...tried unplugging the controller while the game starts and then plugging it in...no go either...Plus when I push in the right toggle for crouch..the controller just goes into a horrible perm vibration mode...any advice? I am just using my BFBC2 as a training mode as my BF3 download continues here in the background.

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: Battlefield: Bad Company 2 (X360)

Post by Primal Fear »

Jackal wrote:Not sure which of these I should copy and insert...the first one or the last one?
The last one by me is a modification for someone who wanted to crouch automatically while using the iron sights. If you don't want that, use the profile form thewookie97.
Jackal wrote:Plus when I push in the right toggle for crouch..the controller just goes into a horrible perm vibration mode...any advice?
Thewookie97 has assigned rumble to the right stick button and as the toggle is also assigned to this button it has to work this way.
To deactivate the Rumble, right click on the stick button and click on "Rumble". And dont forget to save the profile then.

davis.s54
Posts: 10
Joined: 02 Jul 2011, 03:29
Contact:

Re: Battlefield: Bad Company 2 (X360)

Post by davis.s54 »

It doesn't work. I used Wookies profile and mapped the buttons but not one button works in game. I also followed directions about waiting to plug in when it hits main menu. nothing... If anyone knows why please share it with the rest of the class. Thanks :)

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: Battlefield: Bad Company 2 (X360)

Post by Primal Fear »


Post Reply

Return to “Game Profiles”