Call of Duty 4: Modern Warfare (X360)

[SGTCableDog]

Update:Now uses all default in game controls. Uses sets to slow mouse while aiming down sites. Found a console screen shot so I fixed the Dpad assignments to match the 360. Added rumble to the attack assignments. Also fixed the reload/use button, on the console you press to reload and hold to use. If you are looking down the sites and run out of ammo and the game reloads the left trigger aiming down site function will reverse, the work around is to press the left stick button (sprint), there is no need to accually run but it will drop the weapon down to the hip. Also the Start button will bring up the game objectives and if you hold the left trigger and press the start button will pause the game and bring up the game menu. To return to the game with out getting the sites stuck hold the left trigger while moving the mouse over the return to game menu option and just release the trigger. Any time the sites are stuck up press the sprint button. I believe this should also work with MW2.

Code: Select all

;--- Xpadder Profile Data ---
Version=5.6
Name=COD4 MW
Set1Button1Name=Jump/Stand
Set1Button1Slots=Space
Set1Button2Name=Crouch/Prone
Set1Button2Slots=C,HOLD ZONE 0.50s,Left Control,PAUSE 0.01s
Set1Button3Name=Reload/Use
Set1Button3Slots=HOLD ZONE 0.50s,F,RELEASE ZONE 0.01s,R,RELEASE ZONE 0.50s
Set1Button4Name=Switch Weapon
Set1Button4Slots=1
Set1Button5Name=Special Grenade
Set1Button5Slots=4
Set1Button5Rumble=1
Set1Button6Name=Frag Grenade
Set1Button6Slots=G
Set1Button6Rumble=1
Set1Button7Name=Screen Shot
Set1Button7Slots=F12
Set1Button8Name=Objectives
Set1Button8Slots=Tab
Set1Button9Name=Sprint
Set1Button9Slots=Left Shift
Set1Button10Name=Melee
Set1Button10Slots=V
Set1Button10Rumble=1
Set1DPadUpName=Night Vision
Set1DPadUpSlots=N
Set1DPadRightName=Equipment
Set1DPadRightSlots=6
Set1DPadDownName=C4
Set1DPadDownSlots=7
Set1DPadLeftName=Grenade Launcher
Set1DPadLeftSlots=5
Set1Stick1UpName=Forward
Set1Stick1UpSlots=W
Set1Stick1RightName=Right
Set1Stick1RightSlots=D
Set1Stick1DownName=Back
Set1Stick1DownSlots=S
Set1Stick1LeftName=Left
Set1Stick1LeftSlots=A
Set1Stick2UpName=Look
Set1Stick2UpSlots=Mouse Move Up
Set1Stick2UpMouseSpeed=75
Set1Stick2UpMouseMode=Cursor
Set1Stick2RightName=Look
Set1Stick2RightSlots=Mouse Move Right
Set1Stick2RightMouseSpeed=75
Set1Stick2RightMouseMode=Cursor
Set1Stick2DownName=Look
Set1Stick2DownSlots=Mouse Move Down
Set1Stick2DownMouseSpeed=75
Set1Stick2DownMouseMode=Cursor
Set1Stick2LeftName=Look
Set1Stick2LeftSlots=Mouse Move Left
Set1Stick2LeftMouseSpeed=75
Set1Stick2LeftMouseMode=Cursor
Set1TriggerLeftName=Sights
Set1TriggerLeftSetSelect=1
Set1TriggerRightName=Fire
Set1TriggerRightSlots=Left Mouse Button (1)
Set1TriggerRightRumble=1
Set1TriggerRightRumbleStrengths=255,255
Set2Button1Slots=Space
Set2Button2Slots=HOLD ZONE 0.50s,Left Control,RELEASE ZONE 0.01s,C,RELEASE ZONE 0.50s
Set2Button3Slots=R
Set2Button4Slots=1
Set2Button5Slots=4
Set2Button6Slots=G
Set2Button7Slots=F12
Set2Button8Slots=Escape
Set2Button9Slots=Left Shift
Set2Button10Slots=V
Set2DPadUpSlots=N
Set2DPadRightSlots=6
Set2DPadDownSlots=7
Set2DPadLeftSlots=5
Set2Stick1UpSlots=W
Set2Stick1RightSlots=D
Set2Stick1DownSlots=S
Set2Stick1LeftSlots=A
Set2Stick2UpSlots=Mouse Move Up
Set2Stick2UpMouseSpeed=19
Set2Stick2UpMouseMode=Cursor
Set2Stick2RightSlots=Mouse Move Right
Set2Stick2RightMouseSpeed=19
Set2Stick2RightMouseMode=Cursor
Set2Stick2DownSlots=Mouse Move Down
Set2Stick2DownMouseSpeed=19
Set2Stick2DownMouseMode=Cursor
Set2Stick2LeftSlots=Mouse Move Left
Set2Stick2LeftMouseSpeed=19
Set2Stick2LeftMouseMode=Cursor
Set2TriggerLeftSlots=Right Mouse Button (2),HOLD ZONE 0.01s,RELEASE ZONE 0.01s,Right Mouse Button (2)
Set2TriggerLeftSetSelect=0
Set2TriggerRightSlots=Left Mouse Button (1)
Set2TriggerRightRumble=1

==================================================================================================================================

Since this is a game I have I loaded it up and whipped one up real quick. Some features are slowed down mouse when using sights and back button takes a screen shot in game (didn't even know you could until I looked in the controls menu ), and to pause the game hold left trigger and press start button. This profile uses the default controls except you must change the option for sights. Under "Controls>Combat..." you must set "Aim down the sights" to "Right mouse". The default is "toggle aim down the sights" as right mouse. I assume that this will also work for MW2 or be a good start. I don't have it for the PC but I do have it on the 360. The only thing I couldn't verify was the Dpad assignments. I haven't played through the game since reinstalling Windows so the I was using my poor memory for the Dpad. Please feel free to fix and repost.

Code: Select all

;--- Xpadder Profile Data ---
Version=5.6
Name=COD4
Set1Button1Name=Jump/Stand
Set1Button1Slots=Space
Set1Button2Name=Crouch/Prone
Set1Button2Slots=HOLD ZONE 0.50s,Left Control,RELEASE ZONE 0.01s,C,RELEASE ZONE 0.50s
Set1Button3Name=Use/Reload
Set1Button3Slots=HOLD ZONE 0.50s,R,RELEASE ZONE 0.01s,F,RELEASE ZONE 0.50s
Set1Button4Name=Switch Weapon
Set1Button4Slots=2,CYCLE STOP,1,CYCLE STOP
Set1Button5Name=Special Grenade
Set1Button5Slots=4
Set1Button6Name=Frag Grenade
Set1Button6Slots=G
Set1Button7Name=Screen Shot
Set1Button7Slots=F12
Set1Button8Name=Objectives
Set1Button8Slots=Tab
Set1Button9Name=Sprint
Set1Button9Slots=Left Shift
Set1Button10Name=Melee
Set1Button10Slots=V
Set1DPadUpName=Night Vision
Set1DPadUpSlots=N
Set1DPadRightName=Equipment
Set1DPadRightSlots=6
Set1DPadDownName=C4
Set1DPadDownSlots=7
Set1DPadLeftName=Grenade Launcher
Set1DPadLeftSlots=5
Set1Stick1UpName=Forward
Set1Stick1UpSlots=W
Set1Stick1RightName=Right
Set1Stick1RightSlots=D
Set1Stick1DownName=Back
Set1Stick1DownSlots=S
Set1Stick1LeftName=Left
Set1Stick1LeftSlots=A
Set1Stick1UpName=Forward
Set1Stick1UpSlots=W
Set1Stick1RightName=Right
Set1Stick1RightSlots=D
Set1Stick1DownName=Back
Set1Stick1DownSlots=S
Set1Stick1LeftName=Left
Set1Stick1LeftSlots=A
Set1Stick2UpName=Look
Set1Stick2UpSlots=Mouse Move Up
Set1Stick2UpMouseSpeed=75
Set1Stick2UpMouseMode=Cursor
Set1Stick2RightName=Look
Set1Stick2RightSlots=Mouse Move Right
Set1Stick2RightMouseSpeed=75
Set1Stick2RightMouseMode=Cursor
Set1Stick2DownName=Look
Set1Stick2DownSlots=Mouse Move Down
Set1Stick2DownMouseSpeed=75
Set1Stick2DownMouseMode=Cursor
Set1Stick2LeftName=Look
Set1Stick2LeftSlots=Mouse Move Left
Set1Stick2LeftMouseSpeed=75
Set1Stick2LeftMouseMode=Cursor
Set1Stick2UpName=Look
Set1Stick2UpSlots=Mouse Move Up
Set1Stick2UpMouseSpeed=75
Set1Stick2UpMouseMode=Cursor
Set1Stick2RightName=Look
Set1Stick2RightSlots=Mouse Move Right
Set1Stick2RightMouseSpeed=75
Set1Stick2RightMouseMode=Cursor
Set1Stick2DownName=Look
Set1Stick2DownSlots=Mouse Move Down
Set1Stick2DownMouseSpeed=75
Set1Stick2DownMouseMode=Cursor
Set1Stick2LeftName=Look
Set1Stick2LeftSlots=Mouse Move Left
Set1Stick2LeftMouseSpeed=75
Set1Stick2LeftMouseMode=Cursor
Set1TriggerLeftName=Sights
Set1TriggerLeftSlots=Right Mouse Button (2)
Set1TriggerLeftSetSelect=1
Set1TriggerRightName=Fire
Set1TriggerRightSlots=Left Mouse Button (1)
Set2Button1Slots=Space
Set2Button2Slots=HOLD ZONE 0.50s,Left Control,RELEASE ZONE 0.01s,C,RELEASE ZONE 0.50s
Set2Button3Slots=HOLD ZONE 0.50s,R
Set2Button4Slots=2,CYCLE STOP,1,CYCLE STOP
Set2Button5Slots=4
Set2Button6Slots=G
Set2Button7Slots=F12
Set2Button8Slots=Escape
Set2Button9Slots=Left Shift
Set2Button10Slots=V
Set2DPadUpSlots=N
Set2DPadRightSlots=6
Set2DPadDownSlots=7
Set2DPadLeftSlots=5
Set2Stick1UpSlots=W
Set2Stick1RightSlots=D
Set2Stick1DownSlots=S
Set2Stick1LeftSlots=A
Set2Stick1UpSlots=W
Set2Stick1RightSlots=D
Set2Stick1DownSlots=S
Set2Stick1LeftSlots=A
Set2Stick2UpSlots=Mouse Move Up
Set2Stick2UpMouseSpeed=19
Set2Stick2UpMouseMode=Cursor
Set2Stick2RightSlots=Mouse Move Right
Set2Stick2RightMouseSpeed=19
Set2Stick2RightMouseMode=Cursor
Set2Stick2DownSlots=Mouse Move Down
Set2Stick2DownMouseSpeed=19
Set2Stick2DownMouseMode=Cursor
Set2Stick2LeftSlots=Mouse Move Left
Set2Stick2LeftMouseSpeed=19
Set2Stick2LeftMouseMode=Cursor
Set2Stick2UpSlots=Mouse Move Up
Set2Stick2UpMouseSpeed=19
Set2Stick2UpMouseMode=Cursor
Set2Stick2RightSlots=Mouse Move Right
Set2Stick2RightMouseSpeed=19
Set2Stick2RightMouseMode=Cursor
Set2Stick2DownSlots=Mouse Move Down
Set2Stick2DownMouseSpeed=19
Set2Stick2DownMouseMode=Cursor
Set2Stick2LeftSlots=Mouse Move Left
Set2Stick2LeftMouseSpeed=19
Set2Stick2LeftMouseMode=Cursor
Set2TriggerLeftSlots=Right Mouse Button (2)
Set2TriggerLeftSetSelect=0
Set2TriggerRightSlots=Left Mouse Button (1)

This profile uses the default controls except you must change the option for sights. Under "Controls>Combat..." you must set "Aim down the sights" to "Right mouse". The default is "toggle aim down the sights" as right mouse.

[Barrymassey]

Hi i have tried to paste your profile but it says it is a newer version and cannot be pasted?

[SGTCableDog]

I edited it so it should now work with version 5.6 as it uses hold zones but not distance zones.

[SGTCableDog]

Update:Now uses all default in game controls. Uses sets to slow mouse while aiming down sites. Found a console screen shot so I fixed the Dpad assignments to match the 360. Added rumble to the attack assignments. Also fixed the reload/use button, on the console you press to reload and hold to use. If you are looking down the sites and run out of ammo and the game reloads the left trigger aiming down site function will reverse, the work around is to press the left stick button (sprint), there is no need to accually run but it will drop the weapon down to the hip. Also the Start button will bring up the game objectives and if you hold the left trigger and press the start button will pause the game and bring up the game menu. To return to the game with out getting the sites stuck hold the left trigger while moving the mouse over the return to game menu option and just release the trigger. Any time the sites are stuck up press the sprint button. I believe this should also work with MW2.

Code: Select all

;--- Xpadder Profile Data ---
Version=5.6
Name=COD4
Set1Button1Name=Jump/Stand
Set1Button1Slots=Space
Set1Button2Name=Crouch/Prone
Set1Button2Slots=HOLD ZONE 0.50s,Left Control,RELEASE ZONE 0.01s,C,RELEASE ZONE 0.50s
Set1Button3Name=Reload/Use
Set1Button3Slots=HOLD ZONE 0.50s,F,RELEASE ZONE 0.01s,R,RELEASE ZONE 0.50s
Set1Button4Name=Switch Weapon
Set1Button4Slots=1
Set1Button5Name=Special Grenade
Set1Button5Slots=4
Set1Button5Rumble=1
Set1Button6Name=Frag Grenade
Set1Button6Slots=G
Set1Button6Rumble=1
Set1Button7Name=Screen Shot
Set1Button7Slots=F12
Set1Button8Name=Objectives
Set1Button8Slots=Tab
Set1Button9Name=Sprint
Set1Button9Slots=Left Shift
Set1Button10Name=Melee
Set1Button10Slots=V
Set1Button10Rumble=1
Set1DPadUpName=Night Vision
Set1DPadUpSlots=N
Set1DPadRightName=Equipment
Set1DPadRightSlots=6
Set1DPadDownName=C4
Set1DPadDownSlots=7
Set1DPadLeftName=Grenade Launcher
Set1DPadLeftSlots=5
Set1Stick1UpName=Forward
Set1Stick1UpSlots=W
Set1Stick1RightName=Right
Set1Stick1RightSlots=D
Set1Stick1DownName=Back
Set1Stick1DownSlots=S
Set1Stick1LeftName=Left
Set1Stick1LeftSlots=A
Set1Stick1UpName=Forward
Set1Stick1UpSlots=W
Set1Stick1RightName=Right
Set1Stick1RightSlots=D
Set1Stick1DownName=Back
Set1Stick1DownSlots=S
Set1Stick1LeftName=Left
Set1Stick1LeftSlots=A
Set1Stick2UpName=Look
Set1Stick2UpSlots=Mouse Move Up
Set1Stick2UpMouseSpeed=75
Set1Stick2UpMouseMode=Cursor
Set1Stick2RightName=Look
Set1Stick2RightSlots=Mouse Move Right
Set1Stick2RightMouseSpeed=75
Set1Stick2RightMouseMode=Cursor
Set1Stick2DownName=Look
Set1Stick2DownSlots=Mouse Move Down
Set1Stick2DownMouseSpeed=75
Set1Stick2DownMouseMode=Cursor
Set1Stick2LeftName=Look
Set1Stick2LeftSlots=Mouse Move Left
Set1Stick2LeftMouseSpeed=75
Set1Stick2LeftMouseMode=Cursor
Set1Stick2UpName=Look
Set1Stick2UpSlots=Mouse Move Up
Set1Stick2UpMouseSpeed=75
Set1Stick2UpMouseMode=Cursor
Set1Stick2RightName=Look
Set1Stick2RightSlots=Mouse Move Right
Set1Stick2RightMouseSpeed=75
Set1Stick2RightMouseMode=Cursor
Set1Stick2DownName=Look
Set1Stick2DownSlots=Mouse Move Down
Set1Stick2DownMouseSpeed=75
Set1Stick2DownMouseMode=Cursor
Set1Stick2LeftName=Look
Set1Stick2LeftSlots=Mouse Move Left
Set1Stick2LeftMouseSpeed=75
Set1Stick2LeftMouseMode=Cursor
Set1TriggerLeftName=Sights
Set1TriggerLeftSetSelect=1
Set1TriggerRightName=Fire
Set1TriggerRightSlots=Left Mouse Button (1)
Set1TriggerRightRumble=1
Set1TriggerRightRumbleStrengths=255,255
Set2Button1Slots=Space
Set2Button2Slots=HOLD ZONE 0.50s,Left Control,RELEASE ZONE 0.01s,C,RELEASE ZONE 0.50s
Set2Button3Slots=R
Set2Button4Slots=1
Set2Button5Slots=4
Set2Button6Slots=G
Set2Button7Slots=F12
Set2Button8Slots=Escape
Set2Button9Slots=Left Shift
Set2Button10Slots=V
Set2DPadUpSlots=N
Set2DPadRightSlots=6
Set2DPadDownSlots=7
Set2DPadLeftSlots=5
Set2Stick1UpSlots=W
Set2Stick1RightSlots=D
Set2Stick1DownSlots=S
Set2Stick1LeftSlots=A
Set2Stick1UpSlots=W
Set2Stick1RightSlots=D
Set2Stick1DownSlots=S
Set2Stick1LeftSlots=A
Set2Stick2UpSlots=Mouse Move Up
Set2Stick2UpMouseSpeed=19
Set2Stick2UpMouseMode=Cursor
Set2Stick2RightSlots=Mouse Move Right
Set2Stick2RightMouseSpeed=19
Set2Stick2RightMouseMode=Cursor
Set2Stick2DownSlots=Mouse Move Down
Set2Stick2DownMouseSpeed=19
Set2Stick2DownMouseMode=Cursor
Set2Stick2LeftSlots=Mouse Move Left
Set2Stick2LeftMouseSpeed=19
Set2Stick2LeftMouseMode=Cursor
Set2Stick2UpSlots=Mouse Move Up
Set2Stick2UpMouseSpeed=19
Set2Stick2UpMouseMode=Cursor
Set2Stick2RightSlots=Mouse Move Right
Set2Stick2RightMouseSpeed=19
Set2Stick2RightMouseMode=Cursor
Set2Stick2DownSlots=Mouse Move Down
Set2Stick2DownMouseSpeed=19
Set2Stick2DownMouseMode=Cursor
Set2Stick2LeftSlots=Mouse Move Left
Set2Stick2LeftMouseSpeed=19
Set2Stick2LeftMouseMode=Cursor
Set2TriggerLeftSlots=Right Mouse Button (2),HOLD ZONE 0.01s,RELEASE ZONE 0.01s,Right Mouse Button (2)
Set2TriggerLeftSetSelect=0
Set2TriggerRightSlots=Left Mouse Button (1)
Set2TriggerRightRumble=1

[zjcerne2]

i tried the latest profile but when i try aiming down the sights it slows down but doesnt "aim" - it slows down but i still fire from the hip.

any suggestions?

is it hard to program this function yourself? if not, then would you mind telling me how to do it? otherwise if you could just fix it thatd be cool too.

thanks!

[mnl1121]

This profile uses the default controls except you must change the option for sights. Under "Controls>Combat..." you must set "Aim down the sights" to "Right mouse". The default is "toggle aim down the sights" as right mouse.

I believe these instructions from the first iteration of the profile still apply to the newest version. Try that out.

[zjcerne2]

yeah, i checked that and its how it should be.

toggle aim is unbound and aim is right mouse click

[SGTCableDog]

Here is the theory on how it works. In set 1 the left trigger only selects set 2 while held. Set 2 has mouse emulation speed lower and left trigger is assigned [Right Click][Hold Zone .01s][Release Zones .01s][Right Click]. Once in set 2 the right mouse button is clicked to bring up sites. The left trigger is still held longer than 10 milliseconds enabling the hold zone to be processed. The first element of the hold zone is a release zone of the same time minimum of the hold zone so it executes the second right mouse click when the trigger is released and returning to set 1.

It works for me using the 5.7 beta. I will test it on Friday with 5.6 to make sure it works with it.

[SGTCableDog]

I tried with version 5.6 and it worked. When the left trigger is released are you aiming down the sites and from the hip while the trigger is pulled? It some times gets stuck if it reloads the weapon while aiming down the sites. If you press the left stick button (sprint) it will bring the weapon down.

[zjcerne2]

hmm... when i tried it, i pulled the left trigger to aim, but the gun only flinched as if it was trying to "pull itself up" into the aim position but couldn't. when i pulled the left trigger the movements did slow down, but the gun just failed to raise.

ill try it again, though. maybe i somehow messed something up before.

thanks!

[zjcerne2]

yeah its still not working. (I copied and pasted the last one that was posted; was that the right one?)

another problem: it is still flinching but now (this might be the sticking part youre talking about) the modes reverse after a little bit, meaning that it works good for slowing down (the gun still isnt raised), but after a certain amount of time everything is slow until i pull the left trigger - like they have reversed. does that make sense? i wish i could have a video of this for you, but i dont know how to do that...

[mnl1121]

Are you sure your controls in COD4 are the default controls? You haven't changed them at all have you? That could cause a conflict.

[zjcerne2]

hmm.... good question. i think the only thing i changed was the toggle aim thing, but thats fine (if i read your posts correctly).

ill try it again with "set to default" and let you know.

[SGTCableDog]

I get the flinching using the updated profile but the right mouse is bound to "Aim down the sites" in the combat section of the controls menu. When I reset the controls to default then the right mouse is bound to "Toggle aim down the sites". This is what it should be bound to to work with the updated profile. Just for reference I have the original not the "Game of the Year" edition. I can't make the mouse stay slow after releasing the left trigger. It shouldn't get stuck in set 2 because the profile doesn't use nested sets.

[zjcerne2]

alright, that was the problem; your last post answered it.

i changed it back to "toggle aim down sights" and everything was fine.

one last question: how do i change the speed of the zoomed in look? its nice, but just a tad bit too slow.

thanks again! great job!

[SGTCableDog]

In set 2 click on the group assignment icon (looks like a wrench in a circle) for the right stick and choose "Mouse settings..." from the menu. There are sliders to adjust the mouse emulation speed.

[geoboy333]

does anyone have a decent profile for V5.3?

[mnl1121]

does anyone have a decent profile for V5.3?

Xpadder Version 5.3 is so old and outdated that it is impossible to make a decent profile for COD4 with it.

[SGTCableDog]

I think the key word here is decent. Compared to the features in the newer versions, 5.3 is very basic. I no longer have version 5.3, I recently reloaded Windows on my laptop and didn't save the downloads folder which I had all versions back to 2007.12. A simple profile would have WASD for the left stick, mouse for the right stick, left mouse button for the right trigger, space for the A button, and R for the X button. Tap and hold assignments where added with version 5.6 which is well worth the investment. And you can copy and paste the above profiles directly into Xpadder, it's really cool.

[geoboy333]

dont worry got 5.6 now

[seanwronka]

Seems to work pretty well. Good job! Except aiming down the sights has some slow movement. Will this be fixable in the future?

[Jonathan]

I have never played COD4 but I'm sure someone else in this very busy topic will be able to give a more profile-specific answer. If it's a problem with Xpadder then the Feature X for better mouse FPS options will fix the problem when it is added.

[SGTCableDog]

In my profile I tried to strike a balance between speed and accuracy when aiming down the sites. You can increase the mouse emulation speed while aimimg down the sites by first selecting set 2; click the 2 at the bottom right of the main Xpadder window.



Then click the group assignment icon for the right stick and choose "Mouse settings..."



Then adjust the sliders for mouse emulation speed, you'll have to experiment to find a comfortable setting.



Make sure to return to set 1 before starting the game.

[seanwronka]

Thank you so much man! this fixed the issue. Set it to close to 55 and my friend says its identical to the xbox default sensitivity. So anywhere from 50-60 is ideal . Just a small issue with the zoom on the trigger randomly not working and sometimes even getting stuck on the zoom, but I think I read it's getting fixed in the next patch. Great program though, my friend thats a hardcore 360 gamer tried it out today and says its almost identical besides the start button and using the mouse instead on menu options.

[SGTCableDog]

Getting the aiming down the sites to work involved a bit of thinking out side the box. It will get stuck (reversed) if a weapon reload occures while aiming down the sites. On a gaming console the developers can code for this situation, Xpadder doesn't know what's happening in the game so its something we have to live with. The work around for this is to press the sprint command, left stick button. If Xpadder receives a feature that will create a new method to allow a improved way to execute the aiming down the sites I will rework the profile. Right now I don't know what feature this would be.

[cmcsdavis]

do you have the controls for codmw2

[os40]

This doesn't work for me.

I press L2 and it doesn't aim down the sights. it makes the aiming very fast.

Help? Can someone just send me their 360 controller file as well as the COD 4 profile pleasE?

[SGTCableDog]

@cmcsdavis- I don't have MW2 but there are a number of profiles for this game.

@os49- Make sure you are in set one in the main Xpadder window. The sets are at the bottom right of the window.



It's best (and easy) to make your own controller layout.

[phillybrennan]

@cmcsdavis- I don't have MW2 but there are a number of profiles for this game.

@os49- Make sure you are in set one in the main Xpadder window. The sets are at the bottom right of the window.



It's best (and easy) to make your own controller layout.

Is there a link so i can dl your profile?

Thanks

[SGTCableDog]

This post above has the profile. It is contained in the code section. Click where it says "Select all" to highlight everthing in the code box and hit [ctrl+c] to copy it to the clipboard. Then paste using the profile menu in Xpadder.

[Oke_Doke]

Check out the COD4 Controller Theme for the above profile.

[robertsg2005]

I seem to get the "flinching problem" as mentioned above when using the latest version of xpadder.
Ive set "aim down the sight" as right mouse button as suggested, but holding town the left trigger just moves slightly and then reverts back to set1

Any suggestions? Ive reset the controls to default and then set "aim down sight" to right mouse button, but the result is the same.

[Primal Fear]

You have to hold the left trigger instead of tapping it and tapping it again like the right mouse button.

Also there is a problem with the right trigger in this profile, if you tap the left trigger two time too fast you will get stuck in Set 2. Basically this assignment isn't made according to the newest Xpadder knowledge (because the profile is simply too old). I will look into improving this later today.

[Primal Fear]

That should work better:

Code: Select all

;--- Xpadder Profile Data ---
DataType=Profile
Version=2013.06.07
Name=COD4 MW
Set1Button1Name=Jump/Stand
Set1Button1Slots=Space
Set1Button2Name=Crouch/Prone
Set1Button2Slots=C,HOLD ZONE 0.50s,Left Control,PAUSE 0.01s
Set1Button3Name=Reload/Use
Set1Button3Slots=HOLD ZONE 0.50s,F,RELEASE ZONE 0.01s,R,RELEASE ZONE 0.50s
Set1Button4Name=Switch Weapon
Set1Button4Slots=1
Set1Button5Name=Special Grenade
Set1Button5Slots=4
Set1Button5Rumble=1
Set1Button6Name=Frag Grenade
Set1Button6Slots=G
Set1Button6Rumble=1
Set1Button7Name=Screen Shot
Set1Button7Slots=F12
Set1Button8Name=Objectives
Set1Button8Slots=Tab
Set1Button9Name=Sprint
Set1Button9Slots=Left Shift
Set1Button10Name=Melee
Set1Button10Slots=V
Set1Button10Rumble=1
Set1DPadUpName=Night Vision
Set1DPadUpSlots=N
Set1DPadRightName=Equipment
Set1DPadRightSlots=6
Set1DPadDownName=C4
Set1DPadDownSlots=7
Set1DPadLeftName=Grenade Launcher
Set1DPadLeftSlots=5
Set1Stick1UpName=Forward
Set1Stick1UpSlots=W
Set1Stick1RightName=Right
Set1Stick1RightSlots=D
Set1Stick1DownName=Back
Set1Stick1DownSlots=S
Set1Stick1LeftName=Left
Set1Stick1LeftSlots=A
Set1Stick2UpName=Look
Set1Stick2UpSlots=Mouse Move Up
Set1Stick2UpMouseSpeed=75
Set1Stick2UpMouseMode=Cursor
Set1Stick2RightName=Look
Set1Stick2RightSlots=Mouse Move Right
Set1Stick2RightMouseSpeed=75
Set1Stick2RightMouseMode=Cursor
Set1Stick2DownName=Look
Set1Stick2DownSlots=Mouse Move Down
Set1Stick2DownMouseSpeed=75
Set1Stick2DownMouseMode=Cursor
Set1Stick2LeftName=Look
Set1Stick2LeftSlots=Mouse Move Left
Set1Stick2LeftMouseSpeed=75
Set1Stick2LeftMouseMode=Cursor
Set1TriggerLeftName=Sights
Set1TriggerLeftSetSelect=1
Set1TriggerRightName=Fire
Set1TriggerRightSlots=Left Mouse Button (1)
Set1TriggerRightRumble=1
Set1TriggerRightRumbleStrengths=255,255
Set2Button1Slots=Space
Set2Button2Slots=HOLD ZONE 0.50s,Left Control,RELEASE ZONE 0.01s,C,RELEASE ZONE 0.50s
Set2Button3Slots=R
Set2Button4Slots=1
Set2Button5Slots=4
Set2Button6Slots=G
Set2Button7Slots=F12
Set2Button8Slots=Escape
Set2Button9Slots=Left Shift
Set2Button10Slots=V
Set2DPadUpSlots=N
Set2DPadRightSlots=6
Set2DPadDownSlots=7
Set2DPadLeftSlots=5
Set2Stick1UpSlots=W
Set2Stick1RightSlots=D
Set2Stick1DownSlots=S
Set2Stick1LeftSlots=A
Set2Stick2UpSlots=Mouse Move Up
Set2Stick2UpMouseSpeed=19
Set2Stick2UpMouseMode=Cursor
Set2Stick2RightSlots=Mouse Move Right
Set2Stick2RightMouseSpeed=19
Set2Stick2RightMouseMode=Cursor
Set2Stick2DownSlots=Mouse Move Down
Set2Stick2DownMouseSpeed=19
Set2Stick2DownMouseMode=Cursor
Set2Stick2LeftSlots=Mouse Move Left
Set2Stick2LeftMouseSpeed=19
Set2Stick2LeftMouseMode=Cursor
Set2TriggerLeftSlots=TAP TIME 0.01s,Right Mouse Button (2),RELEASE ZONE 0.01s,PAUSE 0.01s,Right Mouse Button (2),RELEASE ZONE 0.01s,Right Mouse Button (2)
Set2TriggerLeftSetSelect=0
Set2TriggerRightSlots=Left Mouse Button (1)
Set2TriggerRightRumble=1