Hi all, I got one problem which is probably very simple to solve. Still I haven't found anything on the forums that could help me, so at last I will just ask it here
At the moment I use xfire for my wired xbox 360 controller. I made a profile for Bad Company cause I use my controller for the helicopters. Now when in my Xpadder settings I currently have two profiles, both activated:
<None> -- <Default>
BadCompany2 -- BFBC2Game.exe
When I was setting this up I assumed that the first profile would make sure that there is no profile active by default, while the second one would activate the Bad Company 2 profile when I am playing that game.
The problem is that the BadCompany2 profile is always active, from the moment I start Xpadder.
I hope someone can help, and thanks in advance!
inactivate profile
Re: inactivate profile
Click on the main Settings icon in the upper right, then un-tick "AutoOpen last used profile"
Re: inactivate profile
That almost did the trick, thanks!
but for one thing: when I stop Bad Company 2, the profile stays active.
but for one thing: when I stop Bad Company 2, the profile stays active.
-
- Xpadder Xpert
- Posts: 2437
- Joined: 09 Feb 2010, 16:41
- Location: Germany
- Contact:
Re: inactivate profile
Save an empty profile and select for the default entry, then it will work. Also don't forget to activate this entry, it's deactivated by standard.